• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

before i re assemble....

BoostJunki3

BoostJunki3

Needs A Turbo
if im never gonna run any smaller than a 3.0-3.2 will a ported stock tb be adequate? or should i open up the inlet on my blower as well since i just did the outlet and run an ls1 tb...
 
Last edited:


Your at no point to upgrade the TB...and if you port your TB, your going to need to re-tune it. As for the port "matching" to the case...just smooth the transition...it should just be the same...but you want to fill the ramp going up on the inlet with epoxy and make it even with the rest of it...sorry if my explanation sucks, but you'll understand what I mean when you get there.
 
bluegtp91 said:
Your at no point to upgrade the TB...and if you port your TB, your going to need to re-tune it. As for the port "matching" to the case...just smooth the transition...it should just be the same...but you want to fill the ramp going up on the inlet with epoxy and make it even with the rest of it...sorry if my explanation sucks, but you'll understand what I mean when you get there.
Click to expand...

cool thanks alot should i bother porting the tb or no?
 
You can if you want, you do realize though you will be hours taking out that much material from the tb if all you have is a dremel.
 
You must log in or register to reply here.
Back
Top