bandook
Donating Users
Re: Top Swap in progress, few questions
lol. I'm gonna leave it like that...extra compression
lol. I'm gonna leave it like that...extra compression
Bandook's 01 Imp, top swap-ified
- Thread starter bandook
- Start date
Scottydoggs
Killa Bee
Re: Top Swap in progress, few questions
yup, no down pipe.
yup, no down pipe.
bandook
Donating Users
Re: Top Swap in progress, few questions
That's what I thought. Would be pointless if I ran with the stock downpipe. Could I even connect to it with what I have?
I got ahold of the guy. He said he forgot. Hope he will have them out tomorrow. Otherwise Ill just buy the new kit on eBay...which I'm kinda wishing I did now. Thought it would be nice to save 50 bucks. So....I may be selling a used, mostly comlete SD header kit soon:th_shakinghead2:
That's what I thought. Would be pointless if I ran with the stock downpipe. Could I even connect to it with what I have?
I got ahold of the guy. He said he forgot. Hope he will have them out tomorrow. Otherwise Ill just buy the new kit on eBay...which I'm kinda wishing I did now. Thought it would be nice to save 50 bucks. So....I may be selling a used, mostly comlete SD header kit soon:th_shakinghead2:
Scottydoggs
Killa Bee
Re: Top Swap in progress, few questions
just wait for the down pipe to be shipped out, you cant use any of the stock stuff.
just wait for the down pipe to be shipped out, you cant use any of the stock stuff.
bandook
Donating Users
Re: Top Swap in progress, few questions
Yeah that's no problems. He's saying he's not sure he has the straight piece though. Isn't that the piece that deletes the cat? Looks like its flared and notched too. Anyways I'll just ask for money back if he doesn't have it and buy the complete kit from SD. I didn't save a few bucks just to to lose an hour or two modifying the exhaust.
Yeah that's no problems. He's saying he's not sure he has the straight piece though. Isn't that the piece that deletes the cat? Looks like its flared and notched too. Anyways I'll just ask for money back if he doesn't have it and buy the complete kit from SD. I didn't save a few bucks just to to lose an hour or two modifying the exhaust.
wannabegtp
New member
Re: Top Swap in progress, few questions
if you sell them what would you ask? And its just missing the dp right?
if you sell them what would you ask? And its just missing the dp right?
bandook
Donating Users
Re: Top Swap in progress, few questions
Lol, already got a nibble
I'm gonna give it a few days to see what he comes up with. But I'll be fair. Right now I have 150 into a buch of useless (to me) curvy pipes.
Lol, already got a nibble
I'm gonna give it a few days to see what he comes up with. But I'll be fair. Right now I have 150 into a buch of useless (to me) curvy pipes.wannabegtp
New member
Re: Top Swap in progress, few questions
haha okay. hmu if you decied
haha okay. hmu if you decied
Scottydoggs
Killa Bee
Re: Top Swap in progress, few questions
as long as hes got the goose neck with the v band and the cat back flange with the o2 bung you can either install a cat, or get a piece of 3 inch pipe at a muffler shop, just bring what you have so they can flair the pipe as needed for you.
as long as hes got the goose neck with the v band and the cat back flange with the o2 bung you can either install a cat, or get a piece of 3 inch pipe at a muffler shop, just bring what you have so they can flair the pipe as needed for you.
bandook
Donating Users
Re: Top Swap in progress, few questions
Ah OK. Good cause he has those two pieces he said. Thanks. Still though, extra footwork and time for me. Moral of the story.... Don't be a cheap ass with already cheap parts :th_thumbsup-wink:
Ah OK. Good cause he has those two pieces he said. Thanks. Still though, extra footwork and time for me. Moral of the story.... Don't be a cheap ass with already cheap parts :th_thumbsup-wink:
Scottydoggs
Killa Bee
Re: Top Swap in progress, few questions
i went used on a set of sd headers, have not regretted buying them one bit. best 100 bucks spent so far lol ( i did have to take them off the car they were on, still worth it)
i went used on a set of sd headers, have not regretted buying them one bit. best 100 bucks spent so far lol ( i did have to take them off the car they were on, still worth it)
bandook
Donating Users
Re: Top Swap in progress, few questions
Amazon simply amazes me some times. Here's the box my plugs came in....
Several heavy things on top of my poor plugs, including h balancer. Another box that came in was large enough to hold a valve cover, stuffed to the gills with packing paper...and contained one drill bit.:th_depressed:
The exhaust pieces were found and will be heading this way today. So that's all good. One bonus is he included 2 band clamps.
Amazon simply amazes me some times. Here's the box my plugs came in....
Several heavy things on top of my poor plugs, including h balancer. Another box that came in was large enough to hold a valve cover, stuffed to the gills with packing paper...and contained one drill bit.:th_depressed:
The exhaust pieces were found and will be heading this way today. So that's all good. One bonus is he included 2 band clamps.
bandook
Donating Users
Re: Top Swap in progress, few questions
Well, slight set back today. Turns out I have a crack in one chamber, between valves. He also said the exhaust seats should all be replaced. Saying they are smashed? The one with the crack does have a little lip under it like its been smashed. What would cause this?
Anyways, I'm going to go by Intense Monday and talk to John. Perhaps he has a line on a nice used set. Hopefully. I don't want to buy online or from yard and risk being in the same situation.
Plan is to finish the port job on the blower tonight so I can also take it in to intense to have bearings pressed in. Bought a bunch of stuff at Harbour Freight including a new electric die grinder and speed controller...and a big bag of sanding drums. Hope to make lots of aluminum dust and as few holes in the case as possible
Well, slight set back today. Turns out I have a crack in one chamber, between valves. He also said the exhaust seats should all be replaced. Saying they are smashed? The one with the crack does have a little lip under it like its been smashed. What would cause this?
Anyways, I'm going to go by Intense Monday and talk to John. Perhaps he has a line on a nice used set. Hopefully. I don't want to buy online or from yard and risk being in the same situation.
Plan is to finish the port job on the blower tonight so I can also take it in to intense to have bearings pressed in. Bought a bunch of stuff at Harbour Freight including a new electric die grinder and speed controller...and a big bag of sanding drums. Hope to make lots of aluminum dust and as few holes in the case as possible
bandook
Donating Users
Re: Top Swap in progress, few questions
I have no clue what he means by smashed seat. Never heard the term. Hoping someone here knew. I'll have John look at them and see what he thinks. I would love to hear that its fine to run. I have 170 in the things now and last thing I wanna do is toss them. I have new valves for them, but now that I know they have had a valve job I'm not sure I can use them. Wouldn't the stems need shortened?
He did say that the guides were good so at least he gave me a little good news. This shop builds multiple k HP engines so I have to wonder if he's forgetting that this is gonna be a sub 350 HP engine. I'm sure at 30+ psi the little imperfections become major issues.
I would still run that head (w/crack) ... Wanna send them to me?
lol...
and what does he mean by smashed valve seats? Lol
I have no clue what he means by smashed seat. Never heard the term. Hoping someone here knew. I'll have John look at them and see what he thinks. I would love to hear that its fine to run. I have 170 in the things now and last thing I wanna do is toss them. I have new valves for them, but now that I know they have had a valve job I'm not sure I can use them. Wouldn't the stems need shortened?
He did say that the guides were good so at least he gave me a little good news. This shop builds multiple k HP engines so I have to wonder if he's forgetting that this is gonna be a sub 350 HP engine. I'm sure at 30+ psi the little imperfections become major issues.
