• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Attention: Chris Hinson/Bully Flo!!



Re: Watch out for Chris Hinson and Bully Flow Heads!!

These guys sound more and more like the turbo guy I mentioned earlier in this thread. Lots of hype posted by him, but zero real numbers.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

There are many of his customers that have been very happy with their heads from him, IMO, that's proof enough. I switched from a NIC only L32, to a NIC w/ ported heads L36 and it had GOBS more power even on the same pulley.. I dropped a half inch of pulley on the same gas and still had zero KR.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

WhiteLightningGTP said:
There are many of his customers that have been very happy with their heads from him, IMO, that's proof enough. I switched from a NIC only L32, to a NIC w/ ported heads L36 and it had GOBS more power even on the same pulley.. I dropped a half inch of pulley on the same gas and still had zero KR.
Click to expand...

How much more power did you make? How much faster did the car run?
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

im sure that adding nearly one whole compression point (3%ish iirc) to an m90 build didn't give you most of that gain, regardless of head flow.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

I read too fast and skipped that point. Lol. Gald James pointed it out. Of course an l36 is going to make a ton more power
 


Re: Watch out for Chris Hinson and Bully Flow Heads!!

I always love hearing Gobs more power or it was so much faster, but no dyno numbers or timeslips. Ever. There's like 15-16 people here on this board that have dyno numbers or timeslips. It just doesn't seem like there are a lot of people that are very serious about power to quantify the gains made, why is this?

Jeff
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

GTPpower said:
I read too fast and skipped that point. Lol. Gald James pointed it out. Of course an l36 is going to make a ton more power
Click to expand...

An L36 isn't going to make a lot more power than an L32 with the same mods, that's for sure. I went from an L32, nearly getting KR, to an L36 with his heads, AND dropped a half inch of pulley and still wasn't even close to getting KR with everything else the same, at even higher air temps.


The car was never going to the track, or a dyno, as it didn't matter to me. I just know it had a lot more power, usable power at that, than before.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

Uh what? The trans never failed. If you're referring to it having no 3rd, it was like that before I bought the car.
 


Re: Watch out for Chris Hinson and Bully Flow Heads!!

Then it's kinda hard to quantify anything really then if your missing a gear right? I mean I spend most of my time in 3rd. Really wish you had fixed the car as it was beautiful and really liked watching it come together.

Jeff
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

J57ltr said:
I always love hearing Gobs more power or it was so much faster, but no dyno numbers or timeslips. Ever. There's like 15-16 people here on this board that have dyno numbers or timeslips. It just doesn't seem like there are a lot of people that are very serious about power to quantify the gains made, why is this?

Jeff
Click to expand...

It's called the PLACEBO effect... And is the Brain that is doing all the work! It will convince you that little sugar pill cured your ills, that the topical oil is growing your hair back, and that a K&N open filter added 20 HP... Lol

I wanna just add my $.02 here... and say (off topic), that lately I feel there has been an effort to close threads a bit too quickly, over sensitivity I guess. Good or bad, it has dampened what I've liked most about this site and what I believe always made it better than the others and allowed it to succeed when they failed. Is that it allowed everyone's opinion to carry the same weight. 10,000 post count or 100. Sometimes it's needed, yes, but I for one enjoy the reads, glad this one has stayed open.

Thanks!
: )
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

WhiteLightningGTP said:
An L36 isn't going to make a lot more power than an L32 with the same mods, that's for sure. I went from an L32, nearly getting KR, to an L36 with his heads, AND dropped a half inch of pulley and still wasn't even close to getting KR with everything else the same, at even higher air temps.


The car was never going to the track, or a dyno, as it didn't matter to me. I just know it had a lot more power, usable power at that, than before.
Click to expand...

Lol. An l36 makes a lot more power.

I love the guys that think something made them way more power and a lot faster. Yet, they never go to the track or dyno.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

coolone said:
It's called the PLACEBO effect... And is the Brain that is doing all the work! It will convince you that little sugar pill cured your ills, that the topical oil is growing your hair back, and that a K&N open filter added 20 HP... Lol

I wanna just add my $.02 here... and say (off topic), that lately I feel there has been an effort to close threads a bit too quickly, over sensitivity I guess. Good or bad, it has dampened what I've liked most about this site and what I believe always made it better than the others and allowed it to succeed when they failed. Is that it allowed everyone's opinion to carry the same weight. 10,000 post count or 100. Sometimes it's needed, yes, but I for one enjoy the reads, glad this one has stayed open.

Thanks!
: )
Click to expand...
There is nothing wrong with this thread, two threads as of late have been closed due to one getting way out of hand and turning into a pissing match which looks terrible to new members and another directly attacking another member. Those two closed threads added nothing to the community.
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

ADecker said:
two threads as of late have been closed due to one getting way out of hand and turning into a pissing match which looks terrible to new members
Click to expand...

ADecker said:
Those two closed threads added nothing to the community.
Click to expand...

I hate seeing threads get locked, and people being banned. Goes against my love of free speech. BUT these ^^^ are both very good points.
 


Re: Watch out for Chris Hinson and Bully Flow Heads!!

This message goes out to everyone who has Chris Hinson/Bully Flow heads.

Would you all mind sharing any real dyno info? Thanks

Sent from my LG G3
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

Ok I got a way to solve this. Somebody has a set of heads. It wouldn't be to hard to take them down to a machine shop and have them flowed. Then (please tell me someone has stock flow numbers) compare them to stock. Simple. I'm sure someone more computer savvy than myself could set up one of those go fund me things or we could just PayPal the person who would take them down. It won't answer the power question, but it would sure tell wether or not the heads flow like they should or not. How does that sound?

I'll pitch in a $20

Jeff
 
Re: Watch out for Chris Hinson and Bully Flow Heads!!

I have 2003 l67 heads and 2006 l26 heads. No idea where locally to get them tested
 
You must log in or register to reply here.
Back
Top