• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Anyone else running t67 setup, need help.

Loftus1995

Loftus1995

New member
Running into a few problems when putting my build together was hoping a few others could help out.

We are running into a few issues with the throttle body and maf with how it sits, I have a gen 5 upper intake with the adapater to work with my gen3 throttle. With that it sits super close to where the downpipe would be. Would just like some other photos of how others ran their piping and how it fits.

Also with the piping for the intercooler, does the bumper and fender clear with how far the pipes are out?? This is a rough mockup as we still have to double check a few things but we feel the pipes are sticling out super far.



Any help is appreciated thanks a lot!!

Sent from my SM-G900P using Tapatalk
 


it appears you have the charge pipe from the intercooler to the throttlebody on backwards. flip it around and report back...
 
my suggestion is to buy some phenolic material and make a spacer to in between the upper and lower intake. That will help with the TB being too close.

A2Ad.jpg


A2Ae.jpg


A2Af.jpg


A2Ah.jpg
 
Looks like you have an lt1(or similar) maf. I cut a few inches off my intercooler piping to compensate for having to have extra length from my maf
 


You must log in or register to reply here.
Back
Top