• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Another stereo question

prettyprix

prettyprix

New member
I just finished putting my pioneer head unit into my new car (2000 gtp) it had a kenwood HU in it already, it also had the SWI-ALP steering wheel control interface. However, the interface will not work with the pioneer HU so i took it out. When I hooked everything on the pioneer up there is NO SOUND!!! If i hook it up in my other car (another gp) everything works fine. Anyone have any experience with the steering wheel interface things? that's the only thing I can think of that would have anything to do with the sound issue. (like which wires from the car harness have to be hooked up to it)
 


^ This. If you are still using the factory bose or if it has the factory amp for the rear then it cuts off the sound. You need to bypass the factory amp inputs in the harness.
 
sic6 said:
^ This. If you are still using the factory bose or if it has the factory amp for the rear then it cuts off the sound. You need to bypass the factory amp inputs in the harness.
Click to expand...

yes. The new one had the bose, I think it may use the amp if that is possible. The speakers defiantly sound amped, but they are all aftermarket speakers.

But if it already had an aftermarket system in it, would it already be bypassed?
 


You must log in or register to reply here.
Back
Top