• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

and...the build begins *UPDATE*IDLE VIDEO!!!

glanzergtx

glanzergtx

New member
So this week (tuesday) the power steering pulley flew off the 900.00 car! well i said F it and wasnt fixing it till i do the build well tomo is tear down time!!!
this car has 202k on it

pulling everything off it going to paint a few parts (fiance picked out the color) plasma blue.
Going to fix a few leaks.
-oil pan etc

I have the following parts
-ported inlet outlet s/c (silencer holes filled)
-ported LIM
-ported heads are done just need valve job now (need to finish)
-machined snout with MPS 3.0
-65# injectors for e85
-Built trans with 3.29 gears 300mm input with 3250 stall
-Drag radials
-55 dry shot nitrous
-Wizaird
-1.9 rockers
-TOGS

things that are coming soon
-ported 97 TB (ordered)
-105# springs and retainers are in route (ordered)
-stage 2 zzp axles (coming soon)

Ported head specs (sorry no pics)
lift intake exhaust
.200 130 105
.300 182 141
.400 211 152
.500 224 173
.600 232 176

:)
I should have this build complete in 3wks or less. depending on the headers and how long it takes them to get here.

there will be more pics posted tomo of the progress on the tear down.

YOU GUYS ASKED FOR IT!! Heres the idle vid!:th_nanana:
YouTube - NIC cam.AVI


:)
UPDATE ***MAY 31st***
NIC cam installed, p/p heads, built trans w/ 245mm trq converter w/ 3250 stall
Picture097-3.jpg

Picture098-3.jpg

Picture096-1.jpg

Picture099-3.jpg

Picture100-3.jpg

Picture101-3.jpg

Picture102-3.jpg

Picture103-3.jpg

Picture104-3.jpg

Picture105-2.jpg

Picture106-2.jpg

Picture107-2.jpg

UPDATE **June 1st**
Picture110-1.jpg

Picture112-1.jpg

Picture113-1.jpg

http://i166.photobucket.com/albums/u96/glanzer_64
**UPDATE** June 2nd FIRED!
[IMG]http://i166.photobucket.com/albums/u96/glanzer_64/Picture116-2.jpg
Picture115-2.jpg

Picture118-1.jpg

Picture117-2.jpg

Picture119-1.jpg
 
Last edited:


Re: and...the build begins

exciting! show some pics of the port work when you get the chance. and did you fill the silencer ports with epoxy?
 


Re: and...the build begins

why not just put it together right with a cam in the first place and save yourself money in the long run?
 
Re: and...the build begins

Bio248 said:
why not just put it together right with a cam in the first place and save yourself money in the long run?
Click to expand...

Well after trying to clean the engine bay with it in the car i said F it and pulled it and now will more than likely go cam :)
 


Re: and...the build begins *update may 4th*

That is the exact way i did that on my yellow prix, i will never pull one out again to much of a pain
 


Re: and...the build begins *update may 4th*

dude, love the pics.. and glad you decided cam! Good luck on the build!
 
Re: and...the build begins *update may 4th*

Lawngoose said:
dude, love the pics.. and glad you decided cam! Good luck on the build!
Click to expand...

yep!
NIC cam went in good w/ new lifters. p/p heads look great! tranny bolted up good after i got the correct flexplate after i found out it was a 245mm trq converter

Pics added at the top
 
Re: and...the build begins *UPDATE*

i see a dick on the window. i see that your friends are just like mine.
 
You must log in or register to reply here.
Back
Top