• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

amp problem

grand2000prixgtp

grand2000prixgtp

New member
ok so in my boat i have 4 subs and they have been working good for the few years that i have owned the boat and last year one day they just stopped working the amp was getting power just not putting anything to the subs and i couldn't find it out. so i decided to hook up the kicker amp i had in my car to there and it sparked and the protection light comes on and it don't work and i don't know why. any ideas as why it would just stop working and blow a amp when i hook it up?
 


incorrect wiring? A short?

You did disconnect the positive or negative from the battery before you hooked up the amp right?
 
go through with a voltmeter and test all your + and - connections. Triple check your ground wire. Mine came loose so occasionally it would trip the protection.
 
Yeah Check and make sure your getting the correct voltage from your positive power (12-14.4v) that would turn on your protect light, also check your fuses on your amps make sure you didn't blow anything.
 
You must log in or register to reply here.
Back
Top