• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Altima SER rims on a gp



Bio248 said:
hub bore is too small, won't fit over the stock hub.
Click to expand...

Wonder if one were to use something like a spring laded brake cylinder hone if you could make it work? Sounds like a hack job but **** its only a couple of mm that need to be sacrificed.
 
if you want to open up the hub bore of the wheel then by all means that will work.

your other solution is to run a spacer to clear the 'lip' on the stock hub, but that isn't exactly a good solution.
 


Worst case scenario? Could snap the studs off, causing the the rim to come off in high fashion, and causing a wreck.

Chances of that happening tho, very very slim.
 


any machine shop worth their name can mill out the hub bore on a set of wheels in 20 minutes.

but most people arent willing to do that kind of work on a wheel. it'll really affect resale value.
 
I'm undecided because I have no idea how they would look on a gp, what you think are they worth it or not? Just want a different opinion
 
You must log in or register to reply here.
Back
Top