• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

alternator relocation

m17davis

m17davis

New member
So Im doing a lot of stuff to my gtp. Im doing a fuse box, battery, and pcm relocation. Also replacing the trans and steering rack... I might install a hand brake from a grand am. Does anybody know how to move the alternator to where the ac compressor is? Do I need a different alternator? Also is there anything else I can move. Like the coil packs? How would I put them under the front header? Maybe the map sensor? I'd really appreciate any input or ideas that would help clean up and organize the engine bay
 


I don't see moving the alternator being a easy step I would a imagine a bit of machining is require to at least make a bracket. I would leave it in the stock location.. Coil packs guys usually move those to the firewall. Map/Baro you can move you'll just have to extend a few wires.
 
stealthee said:
Move the coil packs under the exhaust manifold is a terrible idea too.
Click to expand...

This.. Especially when you have to remember about the spark plug wires.. Back of firewall near the top would be a better option. Check out either Anthony Smith or Machinegunsquids build thread
 


On all the fiero builds he told me to look at. I found that picture myself. I forgot to ask if anyone knew who built that bad boy. Sorry for the confusion.
 
You must log in or register to reply here.
Back
Top