air box removal.....

[daehler311]

Hey guys new to the forum... been lurking around awhile finally signed up!!! Some really awsome information here!! Thanx.
I my first mod removing the air box and install a cone ... anyone see a problem with just removing the box installing the filter right to the stock mass air flow sensor tube??... also made nice little bracket to make sure filter stays stabalized...??

 

[Scottydoggs]

its how its done. rip box out, lay the pcm where the box was or zip tie it in, clamp filter to the maf tube. and thats it.

 

[stealthee]

That's how I did my initial set up. You can make a custom set up if you want to as well.

This is my set up.

 

[daehler311]

looks sharp where did you relocate the mass air flow sensor?

 

[Fivefingerdeathpunch]

It's what the black coupler is bolted too.

Filter - tube - coupler - MAF - coupler - TB

 

[industrialfish]

The airbox comes apart in 3 sections, leave the section that the PCM snaps onto in the car. No reason to remove it unless you are doing a fender wall intake as there is plenty of room even for a setup like Stealthee's, and it still has a 3 inch tube pulling colder air in from behind the headlight.