Aeroforce Install

[ROTTMAN]

http://i326.photobucket.com/albums/k411/kdubhoffy/gaugeinstall.jpg

Ok, so my dic has been flashing on and off and eventually died. I took it apart and figured the bulbs maybe blown but they were fine. Turned out to be dirty contact points on the bulb holders. I then decided to install my Aeroforce in place of the dic as I have never been a fan of that thing in the first place. Have a look, let me know what you think. Had to use photobucket, for whatever reason I cant upload pics directly

 

[ROTTMAN]

Just to add, this can be done without damaging the dic. So for resale, the dic could be put back in. One thing Im not sure about is the traction control. With the dic unplugged I think the traction control is deactivated?? If its not then I hope someone can tell me how to wire a switch to turn tc on/off.

 

[99prixgt]

Just to add, this can be done without damaging the dic. So for resale, the dic could be put back in. One thing Im not sure about is the traction control. With the dic unplugged I think the traction control is deactivated?? If its not then I hope someone can tell me how to wire a switch to turn tc on/off.

see if you can do a toasty burnout, that would tell if tc is working :th_winking:

 

[ROTTMAN]

see if you can do a toasty burnout, that would tell if tc is working :th_winking:

lol, I actually thought the same thing so went out and did it and it didnt kick in so I think Im good. I have an Overkill pcm and Im not sure if Will changes the traction control settings or not so maybe that came into play.