Aeroforce gauge question

[Hockey89]

I plugged my aeroforce gauge in and it won't turn on the red lights flash but the screen won't turn on. It worked originally when I first plugged it in and I can get it to come on if I unplug it then plug it back in. How do I fix this?

 

[Fivefingerdeathpunch]

Do you have the red jumper in the back removed and a constant 12v power source going to it from the 3 wire harness that you need?

 

[Hockey89]

I don't think I have the red jumper removed but I got the 12v installed

 

[Hockey89]

And I thought it was a switched? I got it hooked up to the radio right now.

 

[AaroGaming]

I still have this problem. And I've tried just about every fuse in my damn box to get this to work

 

[GotMelon]

i did mine to the sun roof with an add a circit

 

[AaroGaming]

I have tried the radio, the sunroof, and just about every other turn-key accessory and I still have to re-plug it for anything to happen other than flashing lights! I can completely unplug the add-a-circuit and it has the same effect. It can power from the OBDII port, it just won't activate to display until I remove power and reapply it while the car is running.

But I did notice that after I get it working, if I turn off the car it stays on for about 15-30 seconds, and if I restart the car in that time period it works perfectly.

 

[DanPrixGTP]

Try connecting it to the MALL PGM Fuse.

That's where mine is, and havent had an issue. Also, make sure the red jumper in the back is removed.

 

[AaroGaming]

Connected to Mall PGM

No red jumper used.

If I replugged it, it'll work for as long as it's running. If I turn it off and on again before the screen goes out it works. If the screen goes out before I start the car, I have to replug it to use it again.

 

[Bronco Boy]

What did Aeroforce say about this?

 

[AaroGaming]

I haven't contacted anyone from Aeroforce, I was hoping someone here would know so their reply could possibly help someone else in the future with the problem. I'm having