• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Aeroforce gauge not working..

G

GrandPrixGTP1

New member
So we got my gaskets and all done etc at the shop and then after a day of having the car back the aeroforce gauge wouldnt work.. my check engine light is now on and we know that i need O2 Sensors and we ordered them so were just waiting on them from rock auto.
Im asuming a wire is just disconnected from the computer ? or is there any other possible cause for the aeroforce not to work?
 


Is the jumper on the aeroforce and no external power? Please check the instructions for this stuff. You probably need a power wire.
 
Well, then you probably have no power to the Gauge.

Also, if they hooked the power up to a fuse under the dash, in the glove-box, theres a chance those fuses are blown, or it came loose.

Also, if the fuse for the Cig lighter blew, then you have no power at the OBDII port, which will cause it to not power up also.
 
found the one plug thing disconnected. and read that its supposed to be disconnected when taking the battery off of doing engine work so. yep plugged it in and wallah. works. but it seems a little slow to power up, but it works.
 


You must log in or register to reply here.
Back
Top