• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

ABS Trac control light came on Another one ):

S

sdeters

New member
Code is C0036

What do I do now? I see that it is the left front sensor maybe from the code? Can I replace the sensor or do I have to replace the entire hub? How difficult is it to change the hub on these cars? Do I need a bearing puller ECt. Is there a how to on the site I tried searching but found nothing.

Can I just change the sensor out? Any Help is appreciated. I saw there is two other threads I did not want to hi jack them

found a do it your self link http://www.paulstravelpictures.com/GM-Wheel-Bearing-Hub-Assembly-Replacement/index.html
 


Will the Tire be loose or easy to move back and forth with your hands for the hub assembly to be bad? (I had the car jacked up) I just do not want to buy and replace and if it does not fix it. Not to experienced on these things and would like to narrow it done so I do not waste cash. Thanks for the help I did this but it was tough to tell if hub assembly is bad. Before the lights come on the brake pedal gets stiff then the lights come on.
 
I got the hub off. Pain in the arse The Hub bolts in the back was a pain. Almost rounded the head of the bolts off. You need to use a good I stress good socket snap on or so. Craftsman does not work that well but I got the job done. To get one removed I had to drive a 1/2 socket on it to get the screw out. Time to get new bolts. The seal stuck in the casting socket what a pain had to beat that out. Oh well all is out time to get new stuff tomorrow. THanks for the help. FYI The socketed to take the axle off was a 34mm not 36.
 


hii i have GP gtp 2005 Code C0710.. and also the Trac control is always disable..how can i fix this?? another question...i start the engine.. then when i put D on the shift.. hit the accelerator.. a noise came from the ABS modulle... like '' rhhhhhh'''its that possible that this part is dying?? i know this part its very Xpencive.. also its pretty hard to find cus in my car has another fuse like Active control brake L4 or something like that can some 1 pls tell me what to do? and last Q when i ran over 55 MPH a message came from the computer Service brake System.. wtf?
 
You must log in or register to reply here.
Back
Top