• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

99 GP Oil Pan & motor mounts

S

schwarry

New member
Well, I got the oil pan out, but it looks like the motor mount is trash. It's been leaking so long, that the mount has deteriorated. What mounts do you recommend and from where? Also, the bracket seems to be damaged. Where can I find a NEW one (not new used one)?
 


id look at some pics from the other oil pan threads and see how yours looks compared to the others, its been said the new ones are hard to get lined up and then bolted on. seen a few guys fight with them.
 
I fought to get it out, and everything was oily and nasty. Had to leave it on the cherry picker for the night. Are the mounts at a auto parts store, a true solid mount? Where would I look for the oil pan threads?
 


the mounts are a shot in the dark if they are truly solid or not. id ont see the issue using a fluid filled mount myself. when mine went bad i just got a parts store mount. going from shot mounts, they did make a huge improvement.

flipping the dog bone mounts will also tighten up the engine movement.
 
I straighten out the bracket, and got the oil pan on. Now I have another issue. Some RTV got smeared on the bottom (front) of the windage tray, and I forgot to wipe it off. I havent put any oil in it yet, and the tray is clean and dry. I may be able to scrape it off with a coat hanger and vacume it out the drain hole. Will this smear hurt anything, or should I try to scrape it off? I do NOT want to pull the pan back off. Is there a way to flush it out?
 
I answered in your other thread. Leave it be. Should be fine.

ps..for future: wipe on your cruddy garage jeans when you don't have a third hand for a rag.
 


You must log in or register to reply here.
Back
Top