97 wiring in a 96 gtp

[gambler87]

I have heard that I can swap a 97 Monte Carlo wiring harness into my 96 Gtp. My car has a 3.4 dohc, and the 97 monte harness i have came from a 3.4 Dohc as well. I'm wanting to do this because the 97 pcm has more tables for tuning and has performance shift mode. I also am swapping in a 4t65 trans.

I have been told i have to change some wires in the c100 plug in.I'm wanting a little more detail about the wires that have to be switch. I have went through all of the pinouts for both the 96 Gtp and the 97 Monte.

This is page one of 96 gtp

This is page 2 of 96 gtp

Page 1 of 97 Monte carlo

Page 2 of 97 monte

The pins that don't match are:
A1
A3
B1
B2
B3
C1
C2
J1
K3
L1


Sent from my MB886 using Tapatalk

 

[RareGMFan]

Are you sure you can't just program all this into the '96 PCM? They're both OBDII, and essentially the same physical PCM. Just like you can tune a '97 & up GP to have performance shift on/off all the time (the performance shift button was taken away from the factory after '00), I'd imagine you can do the same for the '96 PCM rather than having to swap wiring harnesses and PCMs.

 

[l67ss]

He was wanting a 4t65

 

[RareGMFan]

Dammit. Somehow missed that part. Then I'd suggest asking on w-body.com. They're much more adept to swapping things around in Gen I w-bodies.

 

[l67ss]

He did, its running now im the one that gave him the idea of using 97 pcm and harnes lol