• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

42.5 injectors tune

F

fbm

New member
So I started with a somewhat fresh tune stock maf ve and changed my ifr 87.4% or something like that and after a day or two of driving I log a run with different driving conditions for a 've tune using table modifier I am around -8 @ idle after using table modifier it changes it to -20 anybody know why
 


If you just changed injectors why are you messing with maf or ve. Put in the proper injector slope and ride out.
 
fbm said:
So I started with a somewhat fresh tune stock maf ve and changed my ifr 87.4% or something like that and after a day or two of driving I log a run with different driving conditions for a 've tune using table modifier I am around -8 @ idle after using table modifier it changes it to -20 anybody know why
Click to expand...

Thats right using DHP. I did the same thing for my 42# injectors on pump gas and it works, but it does run rich. Not -8 rich, but still. Just adjust it down a little more. Try like 85 or 83 % the original value.

And parkave is right. No need to do a full tune if just changing injectors. It's always beneficial, but maybe unnecessary. Just change your flow rate, reset your trims and drive.
 
You must log in or register to reply here.
Back
Top