3800 series 2 Air box Removal

[Jason97GrandprixGT]

I'm trying to install a open cone spectre air filter with aluminum tubing but first how to remove my airbox

Sent from my SM-N910T using Tapatalk

 

[Fivefingerdeathpunch]

Unbolt it??

I don't remember exactly where and what bolts there are but it's not rocket science.

 

[Logan541]

Take out filter there are 3 bolts under it

 

[Jason97GrandprixGT]

The screws have a weird looking shape I'm not sure what kind of flat head to use

Sent from my SM-N910T using Tapatalk

 

[Scottydoggs]

iirc mine was 3 13 mm bolts holding it down. they may have a torx head in the middle of the bolt. whats throwing you off.

 

[idrivejunk]

Once you remove the top half of the box, you can probably just pull up on the bottom half briskly to pop it loose. It has drive rivet type push clips holding rubber bushings to the box. If you lift up the PCM you see the heads of the clips. Don't mess with it from underneath, just yank the box up and the bushings pop out of the sheetmetal holes and stay attached to the box.

 

[Jason97GrandprixGT]

Thanks I removed it I'm trying to install the right degree of pipe to the coupler on the throttle body now. Can you tell me what degree of pipe to get and the perfect length size

Sent from my SM-N910T using Tapatalk

 

[Scottydoggs]

hes got a 97-98 box, its not quite the same mounting as a 99 up. ive ripped out a few 01's. the 97-98 aint gonna happen like that.

 

[JamesIvey24]