• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

3800 L32

Orbital431

Orbital431

New member
i was going to do an engine swap from a 3100 to a 3800 L32, and i needed to know what transmission runs with the L32, and what mods are out there for it. :)
Can any1 help me out?
 


Just to clarify are you swaping a L36(Naturaly asparated Series 2) or an L32(supercharged series 3).....

Almost all mods for the L67 fit the L32, most common trans is the 4T65e-hd.... you will need to run a l67 or other non-L32 throttle due to the L32 being drive by wire(no throttle cable, throttle blade is computer controlled)
 
Probably need to use the L67 (Series II) throttle body, fuel rail (Series III is return-less), wiring harness, and injectors.

A tuner would be a good idea too.
 
i'm not sure of the engine code, but it's the 3100 SFI in a 1994 Grand Prix. Naturally aspirated, yes.
A 10-year difference between engine and chassis, so i want to make sure everything will squeeze in the engine bay and under the car for the transmission. :) Lemme know if want to know more or need to know more. :) <3
 
so Series II harness, and pretty much all the electronic components would be needed. Check. anything else in general i might want to prepare for? this would be my first swap and i'm anxious to get my engine. ^^ lol
 


You must log in or register to reply here.
Back
Top