• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

3.8 Heads question

acidcrashdburnd

acidcrashdburnd

New member
I would guess its possible to take the heads from a 3.8 S3 and put them on a S1 block. My 93 olds with 230k on it has worn out heads with a good bit of valve float. I was going to rebuild my L26 heads that I have from my top swap, put the original springs back on with new valves and stick them on the olds... Just want to check if it was do-able.
 


Sorry, they dont' fit. S2/S3 are symetrical and your S1 isn't. People have tried/researched it and found that they can't make it work based on pushrods etc. Placement is off
 
You must log in or register to reply here.
Back
Top