3.5 SC pulley on 07 GP/GT
- Thread starter 07 GPGT
- Start date
GeddyLee
New member
You could do it, but its HIGHLY unadvisable!
You should at the very least, have a better CIA system, whether it is a do it yourself job or an aftermarket one. Also I think the 07's still have a U Bend in the exhaust piping after the Catback, I cant remember 100%, but I am sure someone with an 04+ can tell you better.
And if you do it, make sure you get the car scanned after doing so. You dont want your newer GP blowing up on you.
You should at the very least, have a better CIA system, whether it is a do it yourself job or an aftermarket one. Also I think the 07's still have a U Bend in the exhaust piping after the Catback, I cant remember 100%, but I am sure someone with an 04+ can tell you better.
And if you do it, make sure you get the car scanned after doing so. You dont want your newer GP blowing up on you.
offroadfury6
New member
these cars are like humans just because we all have eyes and ears, dosent mean that we can see and hear like everyone else.
the best thing you can do for your car is SCAN, i might be able to run a 3.3" pulley and someone with the same mods ,ight only to be able to run a 3.5" pulley.
I would advise 07 GPGT to invest in the MPS pulley system and a 3.6 and 3.6" pullies, and make friends with someone that has a scanner and then check for KR. Chances are you WILL have it, prolly even with the stock pulley!!
the best thing you can do for your car is SCAN, i might be able to run a 3.3" pulley and someone with the same mods ,ight only to be able to run a 3.5" pulley.
I would advise 07 GPGT to invest in the MPS pulley system and a 3.6 and 3.6" pullies, and make friends with someone that has a scanner and then check for KR. Chances are you WILL have it, prolly even with the stock pulley!!
blueguy
The Blue One
Heads? You won't need heads unless you are planning a crazy cam or turbo setup. They are always nice but if you spent 2 grand on heads and another guy spent 2K on other mods...you'd get bent over
Dropping pulley sizes is the last thing you really want to do modding wise. I would say since you already have a CAI then get a 180* or a 160* Thermostat, Colder Spark Plugs (Autolite 104's or NGK TR55's), a 3" Downpipe and U-Bend Delete, DHP/Overkill PCM, THEN....you should be good to drop to a 3.4":th_winking:
Reptile
Bastard
I'd like to see someone run 30*
Meh, The sweet spot is 25*
DacyJ
New member
Heads? You won't need heads unless you are planning a crazy cam or turbo setup. They are always nice but if you spent 2 grand on heads and another guy spent 2K on other mods...you'd get bent over
Dropping pulley sizes is the last thing you really want to do modding wise. I would say since you already have a CAI then get a 180* or a 160* Thermostat, Colder Spark Plugs (Autolite 104's or NGK TR55's), a 3" Downpipe and U-Bend Delete, DHP/Overkill PCM, THEN....you should be good to drop to a 3.4":th_winking:
Thanks. Im glad I found this site because I would have just bought the next size down pulley and then went from there.
SlowM90
New member
Heads? You won't need heads unless you are planning a crazy cam or turbo setup. They are always nice but if you spent 2 grand on heads and another guy spent 2K on other mods...you'd get bent over
Actually they say for a 04+ you SHOULD put headers for the 3.4 (thats not crazy cam or turbo! lol) I know we all have the "same" car but there is some difference between a 04+ and the older body style. Like our cars didn't have the UBend...lol thats one thing pontiac got smart about!
JoshMcMadMac
New member
heads =/= headers
