• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

3.5 Pulley?

Amb4

Amb4

New member
Do you think i could run a 3.5 Pulley with little or no knock/ 2006 Grand Prix GT

I have the following mods:
SSAC Headers
Open cone intake
180 Tstat
Autolite 104
and will get a custom tune afterwards. Im running the 3.6 right now but i want more power hah
 


the difference between a 3.6 and 3.5 is pretty negligable. i would stick with the 3.6 and raise timing.
 
how much boost do you see now??

with intake, headers (no cat) 1.8 rockers and 3.5 i see about 6psi on the intial hit then creeps up to about 10psi around 5500rpm.

you MIGHT see a pound of boost difference your set up going from the 3.6 to 3.5. like bio said throw more timing at it.
 
Alright ill look into getting some more timing in there. My main goal is to beat my buddies stock WRX
 


thats gonna be hard since with a tune he can run more boost. if he goes stage 2 then youre going to need more.
 
i guess the next step is to throw an IC in there. Im sure he wont be able to keep up with that. or am i wrong? haha
 
an intercooler is the best bang for the buck by far, but most people dont want to drop that amount of coin right away. an intercooled car with a downpipe will run a 3.2 pulley or lower and will haul ass compared to stock.
 
sweeettt, that is definitely the next investment then. I'll run it like this for this summer, but over the winter i will put an IC in there. If i found a used one is it worth buying? or is it a part that you should just get new?
 
used ones usually work fine so long as they didnt do anything stupid to them. the only thing youll maybe have to do is change the core, but usually they are good.
 


You must log in or register to reply here.
Back
Top