• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

255/35/20



The 3% is for difference in size between two tires. 3% added to 26.7" is 27.5" and that definitely isn't fitting without rubbing issue.
 
There should be no rubbing with the correct offset.

GXP's ran 255/45/18 up front, those are 27.04in and the 255/35/20's are 27.02in.

You can run a 245/45/18 all corners without rubbing aswell with stock 18x8 rims, bumping up to a 255 section width shouldn't change anything either so long as the offset stayed the same. We are only talking .3in wider tire here.

If he ran a +45-50 offset wheel to match the factory rims, it should be pretty problem free.
 


Well I'll find out later today. I have 8" all around running 255/45/18's and I never had a issue even loaded up. Granted these are 20" vs 18", but my rear suspension has been replaced and doesn't sag. I'll post a update once I have the tires mounted.
 
You must log in or register to reply here.
Back
Top