• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2008 gp intake



X2.. Do some searching around here. Go to the search bar and type in air intake or something along those lines . Search around and see what others have had to say about it. Most will just make their own or even just stick a open cone filter on the the TB.
 
alright thanks for the help guys. i might splurge for a nice one but sadly im 17 and broke hahah.
 


Do what I said spend at most $50 on a filter and be happy with something works better than stock and is cheap.
 
oh alright well ill check them out. and is installation pretty simple? im thinkin about doin it before work tomorrow
 


not sure what motor he has, but the maf is in a different spot on the newer models if i remember right. yours has the sensor outside the throttle body, his is in the throttle body
 


yeah, the 04+ have an external MAF. Here's a pic of my old setup.

18134_381400740553_515575553_10306424_3032752_n.jpg


Where you see the 45* bend meeting the coupler i had to use a slightly smaller pipe to wedge the rubber open, but i'm sure you can make something up. That's a spectre filter, works great. What you see here cost me about 50 bucks.
 
make sure you shield the filter from the hot air of the engine bay, some use the wizair, or a plastic garbage can cut to fit then insulated
 
You must log in or register to reply here.
Back
Top