• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2002 grand prix will not talk to scanner

C

cucv30

New member
Hi i'm new here and i am working with a friends grand prix, its a 2002 with a 3.1, To make a long story short he had a used engine installed and now the trans starts in high gear, and it will not communicate with the scanner. I've checked all the fuses, grounds (that i can find) connections and fusible links. I replaced the o2 sensor on the back manifold as it had 3 wires cut. I thought to come here and see if any of you have run into such a problem before. So i will appreciate any ideas you can give me, and if you can tell me the location of all the main grounds so i can make sure they are all there. Once again thanks for any help.
 


You must log in or register to reply here.
Back
Top