• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2002 GP ... door panel screws ,heater resistor pack screws

A

alok

New member
What's behind the two plugs, behind the rear right side armrest, I can' t see inside those holds. Are they screws with screw heads ,slotted or Phillips or are they screws with bolt heads, if so what size ?

How about the screws that hold the blower resistor pack in ,they look like 7/32 ,are they? Is it much easier to remove blower motor to replace this resistor pack ? With blower motor in place ,I'm finding it ,well ... difficult.


Al
 


Yeah. I removed the blower motor to make it easier, but you can technically do it without. The rear resistor screws can be loosened and not removed. The resistor is slotted.

They are torque head screws. Never checked the size. I just have the assorted bits.
 
alok said:
What's behind the two plugs, behind the rear right side armrest, I can' t see inside those holds. Are they screws with screw heads ,slotted or Phillips or are they screws with bolt heads, if so what size ?
Click to expand...
Two screws, T-25 torx head. You will want a magnet handy as these screws like to fall down inside the panel.
 
You must log in or register to reply here.
Back
Top