• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2000 gtp starting issues.

M

MAZter

New member
I have a problem with starting engine last night. Mobile mechanic look to engine and cannot found something wrong, he say needed to see car in shop.

Sorry for my english, maybe on this video record you can found problem reason with start? Thanks!


In tube in front of engine fuel available.
 


Just to check the MAF and to perhaps rule it out, unplug the Mass Airflow Sensor (MAF) on top of the throttle body and try starting it.

You may have to pedal it to life a little and if it starts without it, you may have a bad MAF sensor. If it does start and you plug the MAF back in and try starting it again and it doesn't, then it's the likely failed part.

You say you have fuel pressure at the fuel rail so that's good.
 
Fivefingerdeathpunch said:
Just to check the MAF and to perhaps rule it out, unplug the Mass Airflow Sensor (MAF) on top of the throttle body and try starting it.

You may have to pedal it to life a little and if it starts without it, you may have a bad MAF sensor. If it does start and you plug the MAF back in and try starting it again and it doesn't, then it's the likely failed part.

You say you have fuel pressure at the fuel rail so that's good.
Click to expand...
Thank you, i will try in monday.

http://troubleshootmyvehicle.com/gm/3.8L/how-to-clean-the-maf-sensor-1
 
Last edited:
You must log in or register to reply here.
Back
Top