• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

2000 Daytona 500 With pics



Going to have a look this weekend. I hope its as simple as flipping the sway bar to allow more clearance. My tranny dipstick is still pressed up against the crossover, but it was not making a sound.

Few issues to take care of as well as install my 3 pillar with aero, boost and A/F. Then the retrofit headlight install!
 
The vibration under my feet has gone away! Driving the thing through the winter will be fun. Hope she wont rust on me!
 
Retrofits are in. Look awesome. Just having an issue with the high beams. I made a thread about it HERE in case anyone wants to check it out. Some useful information, just waiting on a final verdict.

Will post pics tonight.
 
Last edited:


Havent updated in a while.

Ordered TRFS harness and 5500K H1 bulbs for my retrofits. Will post pictures tonight!
Need to swap the pins in order for the hi beams to function properly. Hopefully have some time for that this weekend.

Car is running real nice. Probably the best (haha) Prix I have owned. Too bad she needs to beat winters up in Edmonton. Hopefully the Por-15 and undercoating I did will help save her.
 
3c7a0ca75ef8025674a005474152ec2a.jpg


Just like the way her booty looks in the snow


Sent from my iPhone using Tapatalk
 
3bd9897f4dc1bba19e1f2a3f987e5d0b.jpg
32ed4d1371c8b5645b7967c0d5f949ac.jpg


Taking her back to the shop that welded my down pipe to the resonator. I heard some ticking and looked under the car. I didn't need to feel around for a leak, saw the exhaust pissing out of a pinhole right on the weld!
 
Exhaust leak has been taken care of. No longer any leaks. Took a peek under the car while she was up on the hoist and so far the winter hasnt done any damage. The por/undercoating combo along the rockers is in great shape.
That Por-15 is magical stuff.

Next order of business will be installing the correct harness from TRFS. My highbeams shut off when i flick them on. Also order 5500K bulbs. The 8ks dont offer much viable light output.

Need to get gutter guard painted up and installed behind the GPO grills. Then they can be installed.

Peel off the existing tint from the rear three windows and go get 5% put on all 5 and the sunroof. Then were in business.
 


That reminds me, I need to go get my sunroof done up in 5% in the spring because with the 5% all around its like having a big blinding light shining in the car lol
 
If the snow would melt and the streets could be swept.... I would toss a new windshield in and finally get tinted.
 
No but the rocks and sand scattered all over the roads do. I need a new windshield. Would defeat the purpose having it replaced right now. I'd like at least 2 months of driving without a chip.

I need a brow and therefore won't tint until I have a new windshield!
 
Ordered a tuned unit from Will @ overkill.

Got him to dial it in for my slight mods and a 3.4 pulley. That's as far as I'm modding this DD. (for now)

Now I have to order the damn MPS system and a pulley puller. I dont want to buy the puller. Such a waste.

Anyone want to loan one out?

 


Picked up the 3.4 MPS from a member on here. Need to bite the bullet on a puller and get this damn thing on. Any takers for loaning one out?

This weekend some work will finally get done on the Unicorn I've been delaying this SH1T for long enough! List includes:
- Proper TRFS harness and new bulbs going in.
- GPO's to be installed with "gutter guard" behind
- Subs & deck to get hooked up
- 3 gauge pillar! Aeroforce, boost and Airfuel
- A solid interior detailing

Lets see what I get done
 
Absolutely nothing got done........

Went over to the parents house and helped the old man tear apart his kitchen. Hopefully this weekend I can get into the car.
 
Crank position sensor went in yesterday.
240c7eb076cc3dfa03a20e50e9bb8ca6.jpg


Not too difficult at all following sir billboosts write up. Only issue was getting the correct bolts to pull the harmonic balance. Had to run to Home Depot for bolts as the kit I had were too short.

Need to get at the bank 2 knock sensor at some point. It's been poppin codes for 5 months and the new one is sitting in the garage! Can I please have more time in a day!
 
You must log in or register to reply here.
Back
Top