• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1998 silvermist gtp here

S

silverblowngtp

New member
I figured i'd post a few words here. I have a silver mist 98 gtp coupe and i had a friendly race with a local who's on here his screenname is quicksilver something i don't remeber the rest... well here's the mods i have done stock puley ported blower with the silencer ports welded shut drilled 160 stat open cone intake bbv bypass weight reduction hpt tune cat u bend res delete al 104 plugs... i know i'm forgetting something i know it.. well i look forward to posting here..


Benjamin
 


i live in florida so the 160's gonna help with the heat when it gets hot here and the 104's are gonna fight kr also when it gets hot i ran a 14.2 on this setup with a halfass tune
 
104's are still to cold.

Since you're on the stock pulley I recommend AL606 coppers or AL605's at the most.

160* tstat is also to cold. Whether you live in Florida or not. Get a 180* then.

Boost Bypass - Bypass mod is not a "mod" and should not be done. It is there for a reason, don't bypass it.
 
< Florida resident


You don't need the 160 its doing you more harm them good right now. Throw the stock back in get a tune then go with a 180 if anything.


Plugs are to cold switch to some 606s.
 


You must log in or register to reply here.
Back
Top