• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

1994 Gp

Orbital431

Orbital431

New member
Helloz. I wish I had some pictures with me to show, but the body stripping is going well. I'm pretty sure I've removed at least 150lbs since ive started, got to port the intake with what down-time i've had, and slowly running out of money again. :) lol. Tell me what you think, and i'll try and get some more pictures of how it's coming along
Just thought I'd keep u updatedz. :) <3


YouTube - 1994 Pontiac Grand Prix exhaust
 


Correct about no muffler. was too crowded while i was doing work under the car for the kit, lol. It's the 3100 SFI n/a.

And also, around 00:24, u can hear the engine kinda bogg down :'( any suggestionz or just needs TLC?
 
stock engine, tranny, and exhaust minus muffs? sounds like my brothers car (white 95).

dont beat the car, your transmission with go to pieces.
 
kk. I gots more pictures. :D almost 1/2 way done on the surface. :)

CIMG0263.jpg


CIMG0268-1.jpg


CIMG0264.jpg


CIMG0265.jpg


AHHH!!!! Look wat i found! T_T lol. least it's not an entire quarter panel. <3
CIMG0266.jpg
 


I'll probably chip out all the old Bondo and fill it in with new stuff after i bang out the indent as best i can. :)
any suggestions while the chassis is gonna be stripped any1?
 
while i have it stripped down, i figured "why not" :)

car1.jpg


a poorly chopped scoop on the hood. i think it goes well. It'll lighten my hood just a tad and severely help me with underhood exterior cooling. :) comments plz. (sorry about the mess again)
 


You gpt hood vents in the 89-90 TGPs, 91-96 GTPs. The older versions were a bit longer than the newer version. I'd say some early TGP or GTP vents would look pretty nice IMO....
 
Kk. I got the bumper back on. Can u guyz tell me if everything looks even and symmetrical? and if not, lemme know what needs to be done. :) (where the bumper meets the hood is one of the places i'm aware of, just fyi. lol )

CIMG0281.jpg
 
looks cool i bet when everything lines up and there isnt big gaps an shes all 1 cooler hopefully jet black or a bright poppin coloer
 


I think i've decided on a candy red color. :) Kinda like this here sexy mustang. ^__^

ITEM_6-E-15_1969_MUSTANG_BOSS_429_c.jpg


i'm a sucker for muscle cars too.
 
Little update for what I have. So far this is what I have done. Still being worked on, fyi. lol :)


stripped down to bare metal. straightened out as much as I could, and now in the process of body filling.
CIMG0370.jpg



I'll also be filling in the gaps between the kit and the body for a flush line. Don't worry. :)
CIMG0371.jpg



Same as above
CIMG0369.jpg



Still trying to figure out how I want the headlights to be.
CIMG0373.jpg



Back seats and trunk things are gone to reduce weight.
CIMG0374.jpg



Driver area. Soon to have new seatz. :)
CIMG0375.jpg



Boo on my current engine. Waiting on my Series III.
CIMG0376.jpg



What it sounds like now.
http://www.youtube.com/watch?v=c1l0wTI62lM



lemme know what you guys think so far, and any ideas u may have. :) thnx for lookin.
 
a dark color is a MUST on that car. imho......


that kit does not look good w/ a bright color on it. go a/ a black, or even the t/a purple blue!
 
You must log in or register to reply here.
Back
Top