06 GXP w/monsoon radio upgrade
- Thread starter rguy200073
- Start date
rainmkr2
New member
Did you go to the Crutchfield link about my car - http://www.crutchfield.com/learn/sho...grandprix.html
It has some good information.
Early on I successfully used a MTQ re-Q signal processor.
The 6x9 are pretty much micro subs, they are wired together in parallel (if I remember correctly).
So you can just tap into those wires off the Monsoon amp and send the signal over to the MTX re-Q.
This method worked surprisingly well.
I'd recommend adding a capacitor at each 6x9 if you go this route, they will block the low base and let your new sub do that work.
Hope this helps.
It has some good information.
Early on I successfully used a MTQ re-Q signal processor.
The 6x9 are pretty much micro subs, they are wired together in parallel (if I remember correctly).
So you can just tap into those wires off the Monsoon amp and send the signal over to the MTX re-Q.
This method worked surprisingly well.
I'd recommend adding a capacitor at each 6x9 if you go this route, they will block the low base and let your new sub do that work.
Hope this helps.