Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.
Fuel pressure is 59 with key on and 66-68 running...will only start now if hold gas about 1/4 throttle sputters for a sec clears out n rins fine then untill shut off and starts all over agian
Dirty TB is really common, the TPS sensor doesn't like when the blade hits a few microns of carbon before it reaches the full closed position and it'll snap the blade to fully shut and kill the engine.
Yes cleaned the tb also just replaced cam sensor witch what code it set pulled bat cables for about 30 mins checked wire harness all good and after 10 mins of running set same code agian and only way to start it is cycle key couple times and hold gas about half way rhen will start n run fine...totaly lost....