• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

04+ Hood seal in the front?

RotyP

New member
I have noticed when it rains that road grime passes between the hood and the bumper cover and flys back on to the supercharger, plug wires, and other stuff. I cleaned the engine today and found lots of salt grime from the snow we had a few weeks ago. Not sure if the 04+ cars are supposed to have some sort of seal here or not but mine does not. Has anyone used something to help prevent this? I have looked at pics of other cars and they are like mine.
 


I have noticed when it rains that road grime passes between the hood and the bumper cover and flys back on to the supercharger, plug wires, and other stuff. I cleaned the engine today and found lots of salt grime from the snow we had a few weeks ago. Not sure if the 04+ cars are supposed to have some sort of seal here or not but mine does not. Has anyone used something to help prevent this? I have looked at pics of other cars and they are like mine.

That is the way they come from the factory. I added a 1" thick weather strip seal from the Depot to the underside of the hood. I have not had the car out since October, so I am not positive how much it will help. Should make a big difference though.
 
Ok, good to know. I had been wondering about it. By the way, your car looks flippin' awesome. I am trying my best to find the 06 SE front air dam like you have. Any suggestions where I could look?
 
I have added a foam seal as well and it helps but there is still spray coming up from underneath
 
I would consider this, except for a fear that it might cause heat issues (though obviously not a problem in the winter). Perhaps I could rig up something from the kind of plastic replacement screen used for storm doors. I tend to get small pebbles and such laying on top of my filter that I have to periodically dump off - though I have no way of telling if that's how they got there.
 


Back
Top