04 gtp injector.

[Toms04compg]

I am changing flex plate but im having difficulty with the fuel rail injector process.... What has to come off and from where im sorry but i got no idea im really trying to save money per myself doing this. Thanks

 

[FoSHO99]

You shouldn't have to remove them for a flexplate...

 

[Toms04compg]

What about the wire harness that goes to the fuel rail on top of charger?

 

[BillBoost37]

Tom...

Pull up sligntly on the green or blue piece, it'll move 2mm or so. Then push in on the tab and wiggle off the injector. The piece you move blocks the tab from being pushed and allowing the clip to release from the injector.

 

[Toms04compg]

So basicall i will have a fuel rail with no injectors on and flop rail up when i pull motor?

 

[BillBoost37]

That is a possibility. Also possible is to pick up the fuel line release tool (cheap at any parts store) and remove the line from the rail, then leave the rail on the motor.

I read it originally that you needed to get the electrical connector off the injectors.

 

[Toms04compg]

Yi think ill pick up the release tool .... Thanks man

 

[BillBoost37]

Np...