• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Z34Phoenix

  1. Z34Phoenix

    FS: lightly Used VS Cam

    For Sale: Lightly used ZZP VS cam. Was installed in friends car for about one year. Shipping from 32114 zip code. $175 shipped
  2. Z34Phoenix

    PLX wideband installed inplace of stock O2

    Here is what i came across when installing my PLX wide band setup. First it is a PLX DM-6 SM-AFR Combo kit. It is a 100% full digital setup with a narrow band simulation, wide band, and gauge output. Yes 3 outputs. The gauge is full touch screen and has a very nice graph feature on the...
  3. Z34Phoenix

    Wide Band Logging thru EGR using UVScan.

    Ok here is my step by step on getting UVscanner to log your wideband O2 by using your egr port. Wiring: Step 1) Have a wide band 0-5 volt output and a disconnected/not in use EGR connector. Step 2) Locate the middle wire on the EGR connector. this should be brown and labeled C. It is the EGR...
  4. Z34Phoenix

    Topswap to track [email protected]

    I finally got the car to the track. I wanted to compare to the last time i ran the car with just the NA L36, so i had all my tools, spare tire, speakers and all in the car. This all adds up to about 100 lbs or more. Only track prep i did was made sure to have less then 1/4 tank of gas and...
  5. Z34Phoenix

    L36 turbo, should I run factory 1bar MAP or upgrade to a 2bar?

    Well since you have not figured out how, here you go. Also I am so sorry that i could not remember every table off the top of my head. The picture above shows the MAP section and tables i changed to allow the L36 bin to properly read the L67 Map sensor. as long as your bin has these tables it...
  6. Z34Phoenix

    topswap running! Wow!

    Ok so I got the topswap running. must have been a bad icm harness or vac leak under the blower. all i can say right now is wow! plenty of power outside of boost. almost disappointing, as in normally day to day driving i wont be hitting boost and getting to hear the blower. after tuning for...
  7. Z34Phoenix

    Delete

    delete
  8. Z34Phoenix

    Delete

    Delete
  9. Z34Phoenix

    Help! rough idle then stall.

    Ok after two days of installing my top swap i am left with a problem: Initial start up went fine it appeared. rand for about 1 min with no problems. I turned it off. Checked for leaks. All was good. Second start up went well and lasted about 2-3 min. Third start up I planned to take it...
  10. Z34Phoenix

    desktop dyno program?

    Ok was wondering if anyone has messed with a program like this. where can i find it and what do i have to do to model the 3800?
  11. Z34Phoenix

    Looking for know good 05 gtp tuned bin files

    Does anyone have a known good 2005 gtp (not comp g) bin file. Besides the stock one bill has on bonniepro. Pleae let me know.
  12. Z34Phoenix

    Odd 4th to 2 down shift 05gtp

    Ok so i just tuned kurupt's 05 GTP but he is having an issue when he lets off the gas. It will down shift from 4th down to 2nd quickly skipping over 3rd. has anyone seen this issue before? In the tune the only trans settings that were changed were the 2-3 and 3-4 WOT rpm and mph. no other...
  13. Z34Phoenix

    oil in valve cover breather

    some people drill a hole in the oil fill neck just below the cap... this kinda thing... i know diff engine. but then drill a hole and put a barb fitting on it and run that hose to the intake/ air filter area that does not see boost. well i guess if your maf is on the boost side this doesnt...
  14. Z34Phoenix

    SSm90 stand off?

    I just noticed the ZZP kit includes a "Idler pulley with custom standoff, bolt and washer" I thought that you just needed to run a longer main belt and the SS pulley for the blower. any info would be great.
  15. Z34Phoenix

    These retainers with L76 springs???

    Will these retainers work with the L76 springs? And yes I mean the L76. Not l67. The L76 come off the G8 v8 w/ 6.0L. So they should be LS style. But these retainers don't say anything about being LS style. INTENSE-Racing.com: Manley Performance Valvespring Retainers
See more
Back
Top