• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by yekimmrt

  1. yekimmrt

    FIXED! - Journey through P0446

    I have a 2001 GTP, so the specifics of this post will only apply to the 97-03. I know there are a ton of P0446 threads on this forum but only a few hint at a resolution so I thought I'd write up how I finally fixed mine. I'll start by saying my problem turned out to be my fuel tank pressure...
  2. yekimmrt

    What kind of line splice is this? -ABS

    So I've ordered new FL and FR abs wire harness/connector/lines because mine are both bad, throwing the same ABS/TCC problems we all have/had. My question is....what kind of splices are these? I've never seen them before, and all most of the kits (Dorman, Delco, etc.) come with the same kind of...
  3. yekimmrt

    2001 GTP Rear valve cover

    Want to buy rear valve cover for 2001 GTP. Punched a hole in mine (guess how) a few years ago and patch has failed. I'm in Raleigh, NC, looking for quick turnaround. Willing to pay fast shipping if not local.
  4. yekimmrt

    1.9 Harland Revised Pedestal Rocker/springs kit $270

    I bought this kit from GMR badass a little over a year ago, and have never opened the package. I was re-gasketing my engine and rebuilding my front end, ran long an expensive, hit a few financial snags since then, so it's time for me to move them out of the garage and into the hands of somebody...
  5. yekimmrt

    Mystery bolts....?

    So I finished putting my car back together the other day, and only had a couple of nuts and bolts left over. I can't for the life of me figure out where these go though, And they're pretty distinct. Anybody recognize what I left these out of?? Sent from my iPhone using Tapatalk
  6. yekimmrt

    Upcoming lifter/oil pan/rear cover seal/engine mount etc. etc.

    Ready to work..see some axle grease and leaking rack boot therewhat my motor mount left behindmore leaksdirty transmissionwhat's left of my motor mountmy pops directing some engine movement therelittle leakage from the rear crankshaft seal cover platelittle gasket failure there
  7. yekimmrt

    Upcoming lifter/oil pan/rear cover seal/engine mount etc. etc.

    Hey everybody. I've got the engine out, got the rear cover off, and have a question. Why is this hole here...casting mistake?? Does it see coolant or oil?
  8. yekimmrt

    Upcoming lifter/oil pan/rear cover seal/engine mount etc. etc.

    2001 GTP 155,000-ish miles, original engine and transmission as far as I know. Got the car with 86,000 miles on it seven years ago. Not knowing any better as soon as I got the car I put a K&N cai on it, and aside from a few lights and things don't have any other performance modifications...
  9. yekimmrt

    Delete please

    Replacing a leaking oil gasket on an 01 GTP, I'd like to swap over to the aluminum pan. I live in Raleigh NC, 27607.
  10. yekimmrt

    Throttle Body vacuum connector

    Does anybody have a PN for the U shaped step down vacuum connector coming off of the throttle body or the similar one going to the EVAP, I think? Mine crumbled after a TB cleaning and I've got it rigged up with a T, vacuum cap, and some 3/8 fuel line. I'll be replacing my lifters in the coming...
  11. yekimmrt

    Replacing bad cat, bolt question

    I've gotten the infamous p0420 and after eliminating all other possibilities, have accepted it's time for a new cat. I've got one on order from ZZP as well as a set of spark plug anti foulers to keep the code from coming back, but the bolts from my manifold to the downpipe and cat to the...
  12. yekimmrt

    Electric Cooling fans behaving strangely

    So I've been getting the P0128 for about three years now. I've replaced the thermostat (195) several times, the ECT sensor a few times, the wires to the ECT, tested and replaced the IAT sensor too. The code comes and goes. I've been noticing lately my engine temp running upwards of 240 when I'm...
  13. yekimmrt

    Should my radiator fans be on all the time?

    I've got a 2001 gtp with about 117000 miles, only mod is a K&N intake, and have been getting an "engine running below operating temperature" SES code on my car intermittently for about the past three weeks. The thermostat is operating fine, my car reliably heats up to about 180, but never above...
  14. yekimmrt

    Another Big Thanks

    I'm still pretty new to the forum but I wanted to give a big thanks to all the regulars on here, especially Dubob for the video tutorial on replacing the LIM gasket, and all the others that have replied in detail to the many, many posts on questions about that gasket. Just searching the threads...
  15. yekimmrt

    Hissing after turning engine off

    I have a 2001 GTP Coupe with 110K, and was diagnosing a water pump problem the other day when I noticed after I cut the engine off, there was a hissing noise coming from the driver side/rear engine compartment for about 30 seconds. I duplicated it several times, played with the obvious vacuum...
Back
Top