• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by tweeder

  1. T

    Turbo mounting with sd headers

    Anyone have any pics? Just trying to visualize.
  2. T

    Off road light question

    I have them wired up and were working for about 2 mins while I was aiming them, then they both went out. What went on? I have two 100 watt driving lights from napa # 4509. They are wired so they come on with the hi beams. Is the relay not good enough?
  3. T

    What size is this turbo?

    AiResearch t04 a/r .60 is whats on the cold side, don't see anything on the hot. Looking to add it to the supercharger to take over when the sc runs out of steam.
  4. T

    Will this knock detector work on our engines?

    http://www.ebay.com/itm/Knock-gauge-for-detonation-sensor-klopfsensor-NEW-/181309925670 would be nice to have a visual monitoring system.
  5. T

    The tuning school learn at home kit for sale.

    SOLD.
  6. T

    What to look for when running a smaller pulley

    I have a 3.5 on there now and I only see knock at wot between the 1/2 shift and it's only a 1.something, nothing major. I am looking to put on the 3.3 when the smaller belt arrives. I have done some reading and I see comments all over for yes or no. I have sd headers, 160 thermostat, cai and...
  7. T

    How much smaller of a belt do I need for a 3.8 to a 3.3 pulley drop?

    I have a different configuration and different idler pulley for better wrap so the standard belt sizes won't do. Imam using a gatorback 4050665 belt now on my stock pulley as well as the 3.5 which is on there now. I have a 3.3 on the shelf waiting to go on but I want to order a smaller belt to...
  8. T

    Gen v pcv

    I have the nipple for the fresh air intake on the pcv capped and now have the breather in the oil cap. I ran about a month with it capped (done at time of swap) but no breather with no issues. I have the breather now so how important is that nipple?. I have no egr.
  9. T

    With a mps, can you use different providers pulleys?

    I have an intense mps and I see a zzp pulley size that I want, can I use the zzp on my intense mps hub?
  10. T

    Ltft show rich but wideband and stft say otherwise

    Not sure what's going on and my tuner is having no luck keeping this thing stable. It will run good with a new tune then it will go rich again. The stft are from -3 to +3 cruising around and will occasionally go richer on decel. The ltft go between -13 and -21 but will lean up on decel as the...
  11. T

    WTB Gen V supercharger bolts.

    Need the bolts for a gen v swap. Price shipped to canada postal code v8c 2k3, thanks.
  12. T

    PLX Gen III naroband question

    Heres the instructions. Where does the narrow band wire goto in the pcm? And I take it this allows the wideband to take the place of the o2 and will input that same narroband info in the absence of the o2. Its 2002 pcm
  13. T

    Are gen III and gen v snouts interchangable?

    I have the gen v sitting on the shelf but I need to mod the lim first but might leave that for the winter. My gen v has a smaller mps on it and I was wondering if I could take just the snout and swap it for now to run the smaller pulley.
  14. T

    Wideband question with speed daddy headers.

    This is going in a fiero so anything past the flex pipe isn't used from the kit. I'm running a speed density tune to the stock o2 isn't being used, so can I put my wideband in where the o2 would normally go?
  15. T

    What parts to get for future rebuild

    There's a ton of parts out there that are for sale, but what is needed? Looking to gather parts for a winters project, nothing wrong as yet. Just getting prepared for more boost and slicks. I'm looking at the 300m input, output shaft, pump shaft, hardened 4th shaft, 7/8" chain/gear set and LSD.
See more
Back
Top