• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by The Ripper973

  1. T

    Lifter adjustment?

    I’m getting ready to finish my install of my XP cam with 130# springs and with new pushrods and ls7 lifters with reusable rocker arm bolts. Is there a specific adjustment that needs to be done reguardi g pre-load or is it just torque and go? Thank you all for the help!
  2. T

    Knock sensor harness/cable

    Hey all as I was removing my engine from my gtp I ended up breaking the knock sensor cable and can’t seem to find a replacement. I’m assuming it’s a knock sensor because it’s sitting in the head with just a single blue wire coming out of it on the back of the motor. If anyone can point me in the...
  3. T

    Gen 3 FS Core

    Title says it all looking for a gen 3 full size core with the longer bolts or an ssic core possibly. Also looking for a set of ev1 60# and up injectors. Thanks guys.
  4. T

    Aftermarket Head Options?

    Hey everyone it's been a while since iv posted as the last time I posted was about doing a cam upgrade on my GTP. But that ended up getting put on hold for a while. Anyways I'm looking for an aftermarket set of heads (L67) as I'm looking at running the XPZ cam from zzp. Just wondering if there...
  5. T

    1.6 Roller Rockers

    Just firgured I'd post here to see if anyone has a set of 1.6 roller rockers laying around there looking to maybe get rid of. Thanks you!
  6. T

    Fuel injectors

    Looking for another set of either 42 or 60# injectors for another build in currently doing. Ev1 style. Let me know what you have. Thanks guys!
  7. T

    Cam time!!

    First of all I want to say thank you everyone in this forum for the solid advice iv got in the past from here. Shoutout to Scotty if he's still on here! Right now I'm looking at getting a cam for my 02 Gtp that's on a 3.2 gen 3 with an ssic headers etc.. and I'm looking at going with maybe an XP...
  8. T

    Injectors!

    I'm looking for a set of 60# and up set of injectors that are ev1 for my 02 Gtp as I'm planning on going E85. Also looking for a fuel pump and a wideband currently too. If you have anything please don't hesitate to pm me. Thank you!
  9. T

    What size pulley Should i order?

    Hey guys just trying to get an idea what kind of pulley i should look at running. Iv tried looking around but haven't found any solid information with something similar to what i run. Here is the setup i will be running. *Headers With a ZZP Catback *Ported Lower manifold with a SSIC (GEN 3)...
  10. T

    Time for more upgrades!

    Hey guys just wanted to get some thoughts from people here that have put a gtp on E85 and what kind of success they had. Im considering it strongly this winter to do the conversion as my gtp wont be my daily driver anymore and i can have more time to do things to it. My currents mods are as...
  11. T

    Daytona roof rails?

    Hey all I stumbled across some Daytona roof rails and a hood from a Daytona Gtp. I have no use for the rails as I'm not a fan of them myself. But I'm curious if people look for these as I have no idea what there worth or if people are looking for a set. If someone could chime in that would be...
  12. T

    Next step?

    So currently trying to decide what route I should take. I'm currently on a 3.2 pulley in my gtp with supporting mods like headers intake tune ssic etc.. I'm running 17* at Wot currently and Kr free. My main question is I know my stock injectors are at there max and I plan to upgrade to the next...
  13. T

    What kind of Springs should i get?

    So im trying to figure out if i should upgrade the springs when i do my rocker install on my 2002 Gtp. Right now i have a set of 1.8 yella terra rockers waiting to go in, and currently would like to stay where im shifting which is about 6200 Rpm. My main concern is wearing out the timing chain...
  14. T

    Shift kit needed?

    Hey guys just wondering when exactly a shift kit should be installed. Right now I have a 2002 gtp with headers an ssic with a ported lower intake manifold and currently on a 3.3 pulley with 15 degrees of timing Kr free right now. Ran at the track here the other day and ran a 14.90 up here in...
  15. T

    Rockers anyone?

    Looking for a set of rockers for my 02 Gtp. Not looking for stock but anything that's 1.7 to 1.9 ratio. Shoot me a message thanks guys! Also looking for 42.5 injectors if the price is right.
See more
Back
Top