• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Sl33p3rGt

  1. Sl33p3rGt

    2nd ANNUAL Cars &Burgers Meet!!

    Here we go Cali peeps this is our 2nd year hosting the cars and burgers meet in all vehicles/bikes are welcomed looking for a good time to just relax and enjoy our hobbies with great people...last year we had a gresat turnout with 150+ cars coming and going looking for more this year =)
  2. Sl33p3rGt

    Gen3 M62???

    Today i ran across an old friend that said he had a blower that he has been holding onto for like 6 years....lol I took a look at it a noticed it was definitely an older set up only number i found was on the pulley which read AE85882 done some research and found out it an came off 95 era rivi...
  3. Sl33p3rGt

    Pulley recommendations???

    I have a 99 gtp ive been working on for the last couple of months and curious which pulley i should go with based on my mods i have a smoothflow 3.2 i wanted to drop on it obviously will be tuned 91 octane is highest available in my area,Also if i do run the 3.2 are the stock injectors capable...
  4. Sl33p3rGt

    Pontiac Night-Sac raceway

    Finally was able to get the car to the track lastnight,ran pretty good for no traction....lol best run was on a 2.2 60ft after that i was in 2.3-2.5 60's =/ so heres the results 2.258 60ft 14.547 E.T 93.742 MPH 98 GPGT w/L67 motor Swap Mods- Pacesetter headers 3" exhaust/Dual Magnaflows...
  5. Sl33p3rGt

    MAF issues?

    ok ill be driving down the road and it will completely cut out like its not firing,ive already replaced the fuel pump and filter also,weird thing is ill get out and move the wire around that connect to my the bottom of my coil pack and it seemed to work o.0 once!,although on diffrent occasions...
  6. Sl33p3rGt

    FPR Experiments?

    So,Ive been working on my cousin 85 camaro for last couple weeks and were doing a LS1 conversion.Obviously we had to update the fueling system.Came across that we needed the 01+ corvette fuel filter with built in FPR Was curious if people that modify their fuel rails on our cars instead of...
  7. Sl33p3rGt

    Fuel pressure regulator?"

    SO i assumed my fuel pump was bad car kept cutting out like it was starving for fuel,replaced pump and checked fuel pressure with just key on stayed at 40psi,started and let run at idle and it would jump between 42-43 psi,seemed weak to me at idle,disconnected the fpr vaccum and my pressure...
  8. Sl33p3rGt

    505 torque thrust 2 /and 17x9 cobras?

    505 torque thrust 2. they are 17x9.5? curious if anyone has seen these on a gp? and how about some COBRA STYLE WHEELS 17X9? have an option to get either just wondering fitment with the 9-9.5 and how theyd look
  9. Sl33p3rGt

    Vaccum issue?

    Ok i swapped a 99gtp motor and pcm into my 98gt everything is tits i believe but i think im having some vaccum issues,I get lopey idle and a lean bank1 code. Now idk if this is right or not but it has seemed to work...lol i plugged the hose that controls my interior ac controls,to the middle of...
  10. Sl33p3rGt

    Cars and Burgers ,May 1st 2011, IN & OUT Modesto Ca

    Ok the 1st Cars and Burgers meet will be Sunday May 1st 1pm at IN & OUT Burger in Modesto off Hwy 99 Pelendale rd exit. Spread the word get some cars out there. All makes and models welcomed, bikes and trucks also. . Park behind the drive-thru in the parking lot by the old Savemart. Try to...
  11. Sl33p3rGt

    L36-l67

    need to know if dropping a L67 into a L36 is pretty much plug and play if you have the gtp pcm....blew my 98 gt motor and found a low mile gtp motor just figured id swap them out just curious if itd be a direct swap???
  12. Sl33p3rGt

    Motor Done!!!

    Yup sux...was at in-n-out lastnight at a car meet..car was running fine went to leave out of the parking lot smash it and it stalled out at the light tried to start it back up car would barely turn over,finally started and was miss firing horribly gotcut it off and coasted into the parking and...
  13. Sl33p3rGt

    stall questions?

    Looking to pick up a 3500 stall for n/a build! was curious if thats a decent stall speed for a n/a setup or should i go higher. sitting around 215whp and 250wtq Any suggestions or info would be helpful
  14. Sl33p3rGt

    Rocker Question

    Can you run 1.9 rockers on stock gt valve train? If i do can i run yellow beehives with stock retainers and seats? doesnt that increase the lift to a .490? if im correct i think the stock lift is .413?
  15. Sl33p3rGt

    Northern CALI!!!

    Valley here any locals?????
See more
Back
Top