• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Sirayden

  1. S

    Broken valve guide bosses. WTH?

    Hello. I'm working on an L32 and diagnosing blue smoke at start-up after blue LS6 springs and valve stem seals were reportedly recently replaced. I figured a valve stem seal came off but it was much worse. When I looked through the spring, I could see the valve stem seal at the top of the...
  2. S

    HP Tuners Pro

    HP Tuners Pro with 4 credits. $515 shipped. "] http://i145.photobucket.com/albums/r220/jlwncw/20170117_172036.jpg[/URL] http://i145.photobucket.com/albums/r220/jlwncw/20170117_171218.jpg
  3. S

    Can a Painless Performance (or stock) LS1 harness be modded to work for an L67 build?

    The reason I ask is because I can get a new one for a couple hundred bucks. I also have an HP Tuner Pro to mod the pcm though I haven't used it before. -Can the LS1 pcm be used? Can cylinders #7 and 8 be "tuned out" of it and the 6 cylinders can be fired in the right order? -I'm using a manual...
  4. S

    Intense Stage 1X N/A cam for intercooled turbo build?

    INTENSE™ Stage 1X Normally Aspirated Cam, duration @ .050": 212º/216º, lobe lifts: .327"/.321", valve lifts with 1.60:1 rocker arms: .523"/.514", lobe separation angle: 113º, intake centerline: 109º If I had the funds I would, of course, get a turbo cam. I have the N/A cam which doesn't look...
  5. S

    Vegas 3800 shops?

    Anyone know a good shop for 3800 head work in Vegas? Thanks!
  6. S

    WTB:Modded retainers,130lb spr,pushrods,map sensor, more

    Still need a few parts for my "budget build" so looking for good used stuff. Need: Modded retainers 130lb springs (or similar) Upgraded pushrods, stock length Re-usable rocker arm bolts Double-thick timing cover gasket Big degree wheel Preload checker (need when using ls7 lifters?) May need...
  7. S

    Anyone have leftover ls7 lifters from a V8 kit? I only need 4

    Looking for 4 ls7 lifters. I know some guys are buying the V8 set so looking for your leftover ones. Thanks!
  8. S

    Wire up L67 using an L26 engine harness?

    Hi all. I'm looking to do an L67 swap into my project car and was wondering if an L26 harness can be used. I guess the big question is what kinds of mods will need to be done to the harness or what plug-and-play harnesses will I have to buy to make it work? Thanks for your help!
See more
Back
Top