• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by Runicdionysus

  1. R

    Gen V, LQ4 Maf, IRC Liquid to air heat exchanger, 65# injectors, 2.8" pulley, MORE

    Gen V, LQ4 Maf, IRC Liquid to air heat exchanger, 65# injectors, 2.8" pulley, MORE Had some unexpected bills come up so I'm having to sell some parts. UPDATE prices are now itemized, OBO on all prices. I have a Gen V blower, rotors in good condition with MPS, missing one bolt SOLD 2.8"...
  2. R

    COMPLETE z7/Stattama turbo kit. E85 READY

    okay, so it's (almost) complete. the only other things you need are oil lines, a tune, matching lim if you don't already have one, a smaller brake booster, and a beefy transmission. My "complete" kit comes with everything pictured. T67 turbo with 5k miles on it from previous owner. NO shaft...
  3. R

    Spark plugs and Gap

    What spark plugs do you guys run and what gap? Before Turbo i was using TR6 plugs gapped to .52. I'm assuming this isn't the best option now that I'm turbo.
  4. R

    WTB stock headlight assemblies

    Wtb stock headlight assemblies both sides for 2002 gtp
  5. R

    Not enough vacuum for brakes?

    Turbo kit all put together and running good. Had to get the smaller brake booster from zzp to fit the 3" DP of course. but now the brakes are ROCK HARD. It stops, but with an insane amount of effort. First though was to bleed the brakes, no change. Couldn't figure anything else out so I took it...
  6. R

    Vacuum routing/lines

    I'm just finishing up my t67 turbo build on my l67 with an l26 mani and need some help with the vacuum routing. I'm running stock l67 TB, MAP, and fuel rails. Anyone have any diagrams?
  7. R

    How to remove brake booster?

    2002 GP GT. Trying to remove my brake booster so I can install the smaller ZZP one for my 3" turbo downpipe. I've unbolted the Master Cylinder, and removed the retaining clip, but the rod won't separate from the brake pedal. Am I missing something?
  8. R

    Going e85, what fuel pump? fuel filter?

    Hey guys, I'm going turbo and E85 and have a pretty basic question. I have a 2002 GP GT that is L67 swapped. I already have 80# siemens injectors and just need a fuel pump. Will I also need a high flow fuel filter? will the AEM e85 high flow fuel pump from ZZP work? Or Do i have the Venturi...
  9. R

    Octane Booster bad for your engine?

    Here's the deal, I was getting 2-3* of KR in 2nd and 3rd gear pulls with a 3.4" Pulley, CAI, 91 octane(highest we have here in New Mexico), 2.5" DP, Autolite 104s, and a tune by Reptile, went to Autozone and bought the $25 NOS octane booster, and now I have 0* KR through all gears and RPMs. Is...
  10. R

    Ignition timing question

    What is the stock degrees of ignition timing a gtp should be seeing at WOT? Can it safely be turned up at all? Thanks!
  11. R

    Gen V swap or just drop pulley?

    I found a gen v with LIM for $375 shipped. I have an 02 gtp that's lightly modded, dp, 180, tr6, tune by reptile. Is it worth it for me to gen v swap? Or should I just get the MPS and go to a 3.4" and get a dyno tune? Thanks.
  12. R

    97-03 GTP top speed?

    What's the top speed of the 97-03 GTPs with the governor tuned out?
  13. R

    Erratic misfire under boost, PO134 code

    Hey everyone. I just randomly started misfiring under boost, it's very erratic. I'm also throwing a PO134 code. I tried replacing the O2 sensor and no avail. Not sure if this is related, but my boost gauge also stopped working and now won't read over 3.5psi when it was reading 10psi, just gets...
  14. R

    L36 Stock parts, L67 harmonic balancer, PCM, etc

    I have a bunch of l36 stock parts for sale. Came off my 02 GP GT 140k miles. They're all dirty, been sitting for a bit, but worked perfectly fine when I pulled them off the car in Jan. Everything is OBO. Don't be afraid to make an offer, I have bills to pay and will take anything that seems...
  15. R

    L67 Harmonic Balancer, PCM, ZZP l67 wiring kit

    I have no idea what a good asking price for any of these items are, so everything will be OBO. I'll accept anything that seems reasonable. Shipping from Socorro, New Mexico. L67 Harmonic balancer from Morad parts company, i ended up not using it. 75 shipped OBO L36 PCM. Stock tune. Came...
See more
Back
Top