• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by rileychris

  1. R

    04 gtp misfiring at 3/4 to full throttle

    hey guys just picked up an 04 gtp had many of the 98-2003's but cant seem to track down my misfiring issue on this 04. things ive done. 1. changed to steel lim gaskets. 2. new plugs and wires. 3. checked vacuum lines. 4.cleaned tb. 5. new fuel filter. 6. new air filter. 7. drilled holes before...
  2. R

    sunroof cog gear

    does anyone know where i can get a new metal cog gear that drives the sunroof? seems like its asking for the impossible for a 2000 gtp if you know or have a good one LMK!
  3. R

    Issues after rebuild

    2000 gtp new head gaskets etc didnt touch rotating assembly,180 thermo, 245mm stall conv xp cam 130 springs modded retainers 3.8 sc pulley. No egr it is not tuned out yet... my qiestion is when i start the car cold it revs itself to 3k then drops down stalls starts right back up just got to...
  4. R

    Need parts for 00 gtp

    Hey guys looking to see if anyone has trans cooler lines forsale and also the braket that bolts to the drivers side front head for the dog bone to connect to and the double sized bolt that sits to the right of the starter for a ground wire hook up . Pm me ! Thanks
  5. R

    Iso stock used piston/ front head complete stock as well

    Long story short chipped #3 piston in a gtp I got for dirt cheap also looking for a stock front head for this car as well had a Crack between the valves and burnt intake valve, lmk what you got. Thanks
  6. R

    eBay raybestos 4t65 HD rebuild kit

    OK was looking on ebay and came across a master rebuild kit for my 00 gtp and was hoping some people have ordered any of these kits and had good or horrible luck with them..
  7. R

    dropping cradle completed

    finally got the cradle out of the gtp didn't take to long had to saw off one cradle bolt to it being seized to the nut, so far this has been a great experience im looking to do an e85 conversion wanna kind of go all out on this gtp my other only had the usual 3.4 ubend delete 1.0 pcm plugs...
  8. R

    front passenger cradle bolt

    im in the process of dropping the cradle on my 00 gtp but I got one cradle bolt that will not come out keeps popping up top to where it bolts on to the frame what ever gm has up there to bolt in to.. anyways anyone have this same problem or a solution cant really get myself to saw it off unless...
  9. R

    00 gtp tranny no good

    just picked up a 2000 gtp and no drive no reverse tranny has a whine noise till put in gear previous owner had pan dropped and fluid filter change at that time the mechanic found 2 dime sized pieces of metal in the pan anyways they put new fluid and filter in it and fluid was clean he drove it...
  10. R

    new

    whats up everyone new to this site i have a 1997 gtp my 4th one ive owned. the other gp's were 2000 daytona 500 edition, A black 2001 that got totalled 3.4, fwit pcm, tstat colder plugs taylor wires u bend delete the daytona had the same except still had u bend (not my doing bought it that way)...
See more
Back
Top