• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by jc71corvette2

  1. J

    4T65e hd

    Need gtp trans. I'm in upstate ny will pay freight
  2. J

    Anyone into mini choppers

    Hey few questions. I'm lookn to build a 3/4 scAle chopper with 200 cc. Can i use 1" iron pipe for frame? I plan on a 45* rake Sent from my LG-L38C using Tapatalk 2
  3. J

    Tranny issue. Torque conv?

    98. Gtp no mods 122k miles. Few weeks back my 1st gear sucked it shifted late but after first its gold. Now i think i have 2 probkems here. 1. Sometimes at a stop it stalls. I stop then when i let off brake it stalls. All the gears. Put in 1 and drives not stalling. I then shift up to d and...
  4. J

    98 boost prpblem

    98 hits boost then bogs down . What's the culprit. All stock l67
  5. J

    cone filter

    Ok question. We all know the cone filter on stock gtp makes the sc whine louder and noticable. Well my problem is I just unhoocked the intake from the air box and put on the cone filter on stock tubing (end of intake faces radiator hose) and I hear no difference ! Should it? Or do I need to get...
  6. J

    question about inspection and readiness monitors

    Read that here in Ny depending on the year I can have a few monitors not ready ? Also how many miles should I put on to complete a drive cycle so the monitors are set? I have a obd reader
  7. J

    wanted ported blower

    Need ported blower for my 98 gtp. I want that generation blower must have proof it was ported and polished
  8. J

    Coolant sensor

    98 gtp where is coolant sensor? Got obd2
  9. J

    Gtp. Map and maf

    P0102 code pops up. Replaced the sensor that by the throttle body. Is that a map or maf? Wjere is the other one located
  10. J

    Start issue and resistor for fuel pump

    Ok car been sitting few weeks and been starting fine every few days. Well i just replaced idler pulleys and sc belt on the 98 gtp. Now it wont start! So i bent the prong for a temp fix for the fuel pump relay. It started and stalled after a min. So i unbent it plugged in and was running fine...
  11. J

    Trany line diagram

    Is there diagrams for the trans lines to the radiator.
  12. J

    M90 coupler

    Ok doing my research here and i thinj my coupler is bad on my 98 gtp. It rattles on idle then you hit the throttle it stops. My question is this: it doesnt rattle untill 5 min idle is this the coupler
  13. J

    3.5 idler pulley

    Changin pulleys and i think im missin the one on the bottem. I only see a rounded bolt (made rounded) with a torx bit??? One of these pulleys held on tht way? Its not the tensioner
  14. J

    Tension pulley

    Tryn to replace the tension pulley on the 98GTP. Its reverse thread right? Damm thing wont break loose. Whats the best way of doing this
  15. J

    gen 3 blower belt

    What's the size and part number. Is it 63 or 66" ?
See more
Back
Top