• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by gtpsleeper

  1. gtpsleeper

    2002 modified GP $3,000

    Located in Kansas City, Mo http://kansascity.craigslist.org/cto/5623434894.html
  2. gtpsleeper

    02 works when it wants to

    Alright bros Im at a loss here.... Been dialing the car in and the last few days Ive been doing the usual city driving, cruise, etc... and randomly today my trims decided to go crazy. They were pegging +16.4 (give or take) and thought "damnit, vac leak". So I figured Id go home and check it out...
  3. gtpsleeper

    Aftermarket seat brackets

    Anyone know if they make aftermarket seat brackets for our cars or am I going to have to have to make/ have some made? Was going to upgrade to the 04+ and call it good but found a deal on some sick Sparco seats I couldn pass up. I can just have some made if I have too but it might be cheaper...
  4. gtpsleeper

    dual cores

    1. I get 2 IC cores is probably not gonna net me a ton of performance gain so spare me that. Im doing this to do something different. 2. Ive already got a lot of the obvious issues (hood clearance) stuff figured out. I need a little advice here to save me some troubleshooting down the road...
  5. gtpsleeper

    zzp rear STB

    Got an extra one in red Id like to get rid of. Nothing wrong with it I just dont need 2 laying around. Located Lawrence Kansas 80 shipped you pay the fee. http://shop.zzperformance.com/store/p/1215-ZZP-Rear-Strut-Tower-Braces.aspx
  6. gtpsleeper

    E85, cold start and boobs...

    J/K there are no boobs.... I usually dont drive my car much in the winter so I have never messed with the cold start issue but have been feeling the urge lately. Its always had problems cold starting on days when the temp gets down to the 30* area and Im finally gonna mess with it. I just have...
  7. gtpsleeper

    Security light blinking...

    Ok gents (or ladies)... The other day on my way home from work, the security light came on. Nothing happened at the time but after I parked the car, shut it down and tried to start it again... it would fire up and immediately die. So, I tried turning the key on till the security light went off...
  8. gtpsleeper

    front valve cover

    Aluminum would be great but anything will do. I warped mine and need one so oil will quit coming out under boost :/ . Thanks, Jarred
  9. gtpsleeper

    Aeroforce stays on...

    Just upgraded my Aeroforce from the older version to the newer version. The wiring looks exactly the same as the old one and I have it hooked up the exact same way as before only now, when it is plugged into the OBD2 it stays on. I have my IC pump and both WB and aero all hooked up on the same...
  10. gtpsleeper

    02s being weird

    Sooo Im at a loss here. I recently went back to closed loop from being open loop for the longest time and my 02s are acting.... weird. Basically, it will cycle like normal then it will just be pegged (like in power enrichment) outta nowhere... I have no idea why and there does not seem to be a...
  11. gtpsleeper

    STB fitment confirmation

    I am about to snag some zzp front/rear STBs off an 00 impala... will these fit my 02 GP? Checked on zzps site but they didn specify for that year. Thanks!
  12. gtpsleeper

    Crank case pressure

    Im at a lose here... Relevant: GenV, IC (front PCV blocked), and a new PCV... Currently, I have the rear PCV running via vac line from the rear nipple to the TB (post maf, pre blade) and have the front coming from the oil fill cap to the same spot on the TB. The other day going WOT I get the...
  13. gtpsleeper

    Dual Heat-exchangers

    A few guys have been asking about my dual exchanger setup so instead of answering 100 people Ill just make a thread and direct those curious to here. I did this for a few reasons... 1. See if I can get my temps lower (duh) 2. free up the front air dam to keep air flowing to the radiator and 3...
  14. gtpsleeper

    97/98 coolant tank

    Need a over flow tank from these years as its what Im going to use for my IC setup. PM if you can hook a brotha up! Thanks
  15. gtpsleeper

    High Idle

    I cant figure this one out... On start up, I shoot up to 2k rpms for a second and then creep down to about 1200rpm. In gear, i sit right around 1k rpms. I have played around with my target idle and it has made no difference. I checked for a vac leak and have found nothing. Unplugged the maf...
See more
Back
Top