• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by CadVetteStang

  1. CadVetteStang

    ABS wiring question

    04 Grand Prix. I think there is a break in the ABS harness going to one front wheel. Can that harness be replaced without replacing the whole engine harness?
  2. CadVetteStang

    Has anyone calculated or measured the actual DNA Motorsport spring rates?

    I have seen various applications advertised as 450 front / 250 rear as well as the same drop. This is across the board with W-body, Mustangs and Camaros. I find it hard to believe that they all have the same rate and drop....Has anyone calculated or measured the actual DNA Motorsport spring...
  3. CadVetteStang

    I sent them an email reguesting extended length ball joints. Your turn. let's do this

    This might be our best shot at getting extended length ball joints for our cars. I'm actually impressed with the new Terrain Tough Extreme line that Mevotech has come up with for heavy duty trucks and fleet vehicles. Part# TXK5331 fits our cars. I sent an email requesting extended lengths of...
  4. CadVetteStang

    Anyone tried the new TTX Terrain Tough series ball joints - Mevotech? Rockauto has it

    I was shopping Rockauto a little while ago and saw that Canada's Mevotech has a ball joint that will fit the Grand Prix in their new Terrain Tough line? I didn't know anything about them and found this video: Mevotech TTX: Terrain Tough Xtreme - YouTube Is seems to be very different from...
  5. CadVetteStang

    where is the thread about the vertical LCA bushing made like a flat ball joint?

    I think the thread title is something like: "Massive Steering Improvement for Fifty Bucks". I have searched for it here and in google. It is about a replacement for the front vertical bushing in the Lower Control Arm , made by Moog, that is like a flat ball joint. It is a press in part, like the...
  6. CadVetteStang

    Front strut recomendations (2 very different cars)

    I'm needing to replace the FRONT struts on 2 very different cars driven very differently. Recomendations please: Car 1. My wife's 04 Grand Prix GT. FE2 suspension. 147,000 miles. She does ZERO performance driving and is interested in comfort and safety. She has no complaints about the FE2 ride...
  7. CadVetteStang

    What's the latest tech on 14" brakes? (Esp. fifth gen Camaro)

    All of the tech I'm finding on this subject is several years old. My goal is 14" front rotors. I already have it worked out for GT500 Mustang rotors and C5 Corvette calipers using adapter spacers for the abutment brackets. That's cheap, easy, and will allow me to keep my 18" Bullitt wheels...
  8. CadVetteStang

    need feedback about autoX spring rates for AGX front struts

    I'm rethinking my spring rate and lowering. This is a daily driver that will see autocross once per month. I will be using the AXGs for the 97-03 GP, however my Eldo is 50 lbs. Heavier at each front corner, has a 2.5" shorter wheelbase and 2% better f/r weight distribution. The GP stock rate...
  9. CadVetteStang

    shorter AGX front struts for GP? any swaps?

    Looking for shorter front struts that will bolt up to to the 97-03 GP. Car will be lowered about 1.5". Needs to be a car that KYB makes the AXG for. I talked with one of their tech reps on the phone and he didn't have the ability to look up a shorter strut with the same mounting styles. If I am...
  10. CadVetteStang

    Cadillac rear end in W-body for autoX?

    Has anyone ever tried to upgrade the W-body rear end with an Eldorado/Seville modular unit? It's a lot like that of the pre 95 SVT Cobra Mustangs in design and can be track tuned. Here is a video of my Eldorado in a very easy road run after a rear suspension build. The front suspension is...
  11. CadVetteStang

    are there any 97-03 style heated side mirrors ?

    They don't have to be from a 97-03 car as long as they will bolt up. If I can't find a heated mirror in the same style, then are there some exotic style mirrors that will fit?
  12. CadVetteStang

    Wheel backspacing and offset chart

    I made this chart back in 2008. Wheel width and backspacing is listed in inches. Offset is listed in millimeters. Here’s how it works: If you are thinking of buying a set of wheels and the seller posts the width and offset, you can use the chart to find the backspacing to see if it will...
  13. CadVetteStang

    anyone make roll center correction ball joints for the 99-03 cars?

    I have looked and can't find them anywhere. I would settle for an adaptor to mount a 4 bolt ball joint since you can find those longer than stock length to put the A-Arm back to a good angle when lowering the front suspension. BTW, new here. First post. Been looking at some of the threads...
See more
Back
Top