• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by BadDecisions

  1. B

    Methanol Controller Vacuum Line

    I recently picked up an older Snow Performance water/meth kit that uses a VC-100 controller. There's a nipple on the controller to run to a vacuum source to turn on the controller (needs 5 psi). I was just wondering where you guys who are running meth have run that line to. I've read of people...
  2. B

    GXP Transmission to 3800

    Hey guys, before anyone tells at me for not searching the forum, I've tried. I found the one write up about doing the swap that ended with a hole in the bellhousing - I'd rather not have that lol. If there is another thread, I'm sorry and I would appreciate being pointed in that direction I...
  3. B

    Maxing out stock MAF?

    Hey guys. I'm still having issues after my last dyno tune. I installed 42.5lb injectors, 3" exhaust and 1.9 RRs so that I could drop to a 3.0" pulley (I have all other supporting mods) - 2006 Grand Prix GT Basically what happens is when I'm on the highway the car will go into "reduced engine...
  4. B

    P0068 - Vacuum Leak at Boost Solenoid?

    Hey guys, I recently had my car tuned again for the winter upgrades. I'm now having trouble with a P0068 engine code and power limiting. It's making the car virtually undrivable on the hwy. When I'm getting on the Hwy and try to give it more throttle to merge, the car throws P0068 and goes...
  5. B

    Grand Prix Coilovers OR Rear Lowering Springs

    Hey guys, I'm just wondering if anyone has a set of coilovers for sale. I'm in Canada but I am willing to pay any shipping and duties for shipping them from the states. I'd also be interested in a set of rear lowering springs as well. Cheers! Matt
  6. B

    3.0" Pulley - Bigger Injectors Necessary?

    Hey guys, Ive read conflicting articles about upgrading your injectors for a 3.0" pulley. Some say its necessary, others say you can get away with stock depending on the tune. Just wondering if anyone has any experience with it. Cheers
  7. B

    3"+ Exhaust

    Hey guys, It's time to get rid if the stock exhaust on my car. I have read that the stock system is good to 400hp and I'm currently sitting at 300hp at the crank. The dyno tuner I bring the car to recommends going to 3" exhaust and I've read forums where Overkill Performance highly suggests...
  8. B

    3.1" Pulley without 1.9 Rockers?

    Hey guys, I have the opportunity to pick up some 1.9 Yella Terras for $450. I'd like to drop from my current 3.4 to a 3.1 pulley. I'm currently running a full stack, headers, exhaust, 104s, 180 thermostat, FWI. My question is, would I be able to get away without doing the rockers and put...
  9. B

    Wanted - 3.1" or 3.2" MPS Pulley

    Hey guys, I'm wondering if anyone has a ZZP or Intense 3.1" or 3.2" supercharger pulley that they are looking to part with. I'm located in Souhern Ontario and an willing to pay for shipping from wherever. Thanks guys Cheers Matt
  10. B

    Intercooler Install - Extremely Tight Supercharger Belt

    Hey guys, I bought a full stack intercooler off one of the guys on the forum last year (big thanks btw) and I'm finally getting around to installing it thanks to this quarantine. The install of the intercooler core has gone pretty smooth so far. Now I'm running into 2 small issues. #1 - The...
  11. B

    FMHE Install - VW Rad -Help Please

    Hey guys, I was able to pick up Moozery's intercooler set up earlier this summer (great guy by the way), and I will be getting into the install in the next few weeks now that the car is being parked for the fall/winter. The set up he had came with a VW rad as for the heat exchanger. I've...
  12. B

    Header Wrap...Yes? No?

    I just picked up a used set of SLP headers for my '06 GT. They're in decent condition, no cracks or dents, but the coating is coming off in a few areas. My question would be if anyone has experience in wrapping headers on a W-Body or if I should just have them sand blasted and ceramic coated...
  13. B

    '06 GT FWI Thoughts

    Hey guys, just thought I'd post a few pics of my FWI set up. Its 4" ABS the whole way through. Just wanted some feedback from some of you more experienced guys. It does 90* right off the filter and then 22.5* to get through the inner fender without cutting anything. Too many bends? Any thoughts...
  14. B

    L67 3.4" Pulley vs L32 3.6" Pulley

    Hey guys, I apologize if this has been talked about before, I just can't seem to find the definitive answer I'm looking for. I'm aware that the Gen V blower is a more efficient design and am aware that the L32 is more prone to KR. I was originally going to do the work to drop to a 3.4" pulley...
  15. B

    WTB - pulley puller, MPS and lowering springs

    Hey guys, I'm looking for a supercharger pulley puller, MPS (or press on 3.5" pulley) and rear lowering springs for my '06 GT. I'm located in Niagara Falls, Canada and will pay for shipping from US or Canada. Cheers
See more
Back
Top