• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by 92bird

  1. 92bird

    trade intense s3 blower cam for vs, s1x, xp, etc

    Need something smaller that will work with stock heads pm me!
  2. 92bird

    Thread size in radiator?

    Is this the part I need to thread into the tranny cooler on the radiator, then go to -6an? http://www.summitracing.com/parts/sum-220667/overview/ I just got a ZZP radiator, but it looks to use the same fittings as the stock rad does. Thanks, Jeramie
  3. 92bird

    Built 4t65e in action, turbo GTP - short vid attached

    Decided to take a vid the other night getting on the highway. I've got about 1,100 miles on my first ever home built 4t65e, with some tricks and lots of advice from Dave at 3EP (BIG thank you). This is an intercooled Z7 kit on ~9 psi, and my daily driving street tune, at high altitude in Denver...
  4. 92bird

    Why doesn't my car like ZZP plug wires?

    I've tried running their 10.3mm wires, and the car misfired under boost so I exchanged them for a set of their new 10.5mm wires. Now the car will barely even idle. I triple checked the cylinders and they are all hooked up correct, plug wires clip on nice and tight both at the spark plug end and...
  5. 92bird

    *Urgent* need help identifying chain, 7/8th or 15/16?

    I'm assembling my built transmission, with a new 300m input shaft and a used (supposedly less than 500 miles) 2.93 single chain set. Upon assembly, the chain appears stretched.. I can press on it and it touches the bottom of the case. It looks a little different than some of the 7/8 chain sets...
  6. 92bird

    Need help selecting torque converter for turbo car

    I have a z7 intercooled turbo kit on a stock L67 motor (only mod 1.95 yella terra rockers and l76 springs). I'm using a Precision Billet 5858 cea turbo. The car is mostly street with a rare visit or two to the drag strip. Primary use is street. I can build 11psi on the brakes with a stock L67...
  7. 92bird

    Which clutches for400+ whp turbo GTP?

    I have a set of Raybestos blue plate specials with z-pack steels new in the box. I know these aren't available anymore, but before I decide to use them I just wanted to double check my options. The car is a daily driver, lots of stop and go driving. I'm just wondering if these are the best...
  8. 92bird

    New wheels, Moda MD7 18x8

    Moda MD7 18x8 Eagle F1 245/45/18 GS-2 Vogtland springs Whatcha think?
  9. 92bird

    Need Part number for rear Gen V 5 case bearings

    I searched, and found the part number for the Gen 3 (part # FC 65477), but I need the part number for the Gen 5. Does anyone know what it is? I am powdercoating the case, which requires replacing these bearings (they have a seal in them, unlike the Gen 3). I know ZZP sells them, but I have a...
  10. 92bird

    "Modbug" valve body??

    I've been searching and have come up empty handed.. I purchased a burned up used core 4T65E that has some work done to it. I bought it for the parts inside.. It has a ZZP 4340 input shaft, 1 piece chain, and hardened 4th clutch hub. Trans was built locally but burned up within 1000 miles...
  11. 92bird

    Sonnex Line Pressure Booster kit?

    Has anyone used this in a 4T65E rebuild? Sonnax - Aftermarket replacement transmission, torque converter, and high performance automotive parts I've used this in a couple 4R70W ford RWD rebuilds, and it works very well. Stock-ish line pressure at low throttle/loads, and higher pressure when...
  12. 92bird

    Replacement bushings for GMPP trailing arms?

    I got my GMPP trailing arms used, the bushings have seen better days.. I've searched but cannot find an answer.. Where can I get replacement bushings for these arms? Anyone make a poly replacement? Thanks for any info. Jeramie
  13. 92bird

    KYB Excel-G vs GR-2 - interesting discussion with KYB tech.

    When looking to redo my suspension, I was originally going to go with KYB AGX/Vogtland spring combo. But then $$ comes into play, so I had decided on GR-2 to save a few bucks with the vogtland springs.. But when doing my research I found that there are a few different part numbers floating...
  14. 92bird

    Difference between KYB GR2 struts 97-98 vs 99-03??

    Looking to replace the struts on my 2000 GTP. KYB says 97-98 use part #334227 and 99-03 use part #339015 (front struts) Yet, all Monroe replacements use the same strut for 97-03??? (front struts) Just wanting to know what the difference is, is one firmer than the other? Also, for the rear...
See more
Back
Top