• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Recent content by 2003 SSEi

  1. 2

    3800/4T65-e are VIN tagged

    When I was doing my big build I obviously had the engine and trans out of the car. I looked into a old wives tale I came across on the Internet of the 3800's being VIN tagged. Many people wouldn't/couldn't believe it.. Here are the facts This is located above the starter, but below the deck...
  2. 2

    ZZP Chrome Moly diagonal Braces

    Looking for a set of the ZZP Diagonal Braces. I have the STB's and want to match Condition does not matter as long as they are not bent. PayPal Ready
  3. 2

    Tubular Cross Braces

    Looking for a set of the Tubular cross Braces that ZZP sells to match the Strut tower bars. Condition isn't important as long as they are not bent
  4. 2

    Why have 90% when you can have 112%????

    MP112 that is So a while ago I picked some rare old school parts, namely a Intense MP112 Kit. Rumor has it they only made betweek 5 to 10 of these kits. Kinda like the Whipple kits, these came out as the Turbo Kits were coming out. I went over the top, with some notable things. the...
  5. 2

    ATI Balancer

    I have a ATI Balancer, and have purchased a new GM Crank Bolt. Remembering back, and looking at ATI's most of them come with a bolt and washer. can I use the new GM Bolt or should I call ATI and see if they can supply me with a bolt and washer?
  6. 2

    Racetronix 255lph Conversion

    When you have a H body, but the need more fuel is life, you have to adapt. To install most of the High Volume Pumps on the market, the conversion to venturi is needed. why, it fills the canister with fuel instead of relying on the level in the tank to fill the bucket. this keeps the Pump Cool...
  7. 2

    Adding the 05+ Rear Cup holder

    Not really a big "OMG that is the most awesomness thing I have ever done" mod, but none the less. for any of the 04 and 05 1/2 guys that don't have the rear cup holder and would like to add one, its very simple and easy. Here is the OEM 05+ Rear Cup holder that sits on the floor behind the...
  8. 2

    Double Roller Chamfer

    Im Going to be installing a few go fast things on a car and had a question about the double roller setup. I have a brandy new Rollmaster purchased from ZZP 2 years ago still in the plastic that will be used I have heard some people say that the Crank Gear needs Machined to match the Stock...
  9. 2

    Head Gasket talk

    no I don't have a Head Gasket Problem, but I will be pulling the Heads for some upgrades. lets talk about the pros and cons of the Fel-Pro VS the GM OEM/Victor Reinz Head Gaskets. its going to be on a build that should make 400+whp, Boost in the 15psi+ range. I will be using ARP Studs...
  10. 2

    Stattama Turbo Kit

    Stattama Kit. This is the hot side kit. This kit came off a car that made 550+ whp. $2000 plus ship (and open to offers) Front and rear stainless p-logs Stattama crossover 3inch Stattama down pipe Comp CT360 turbo 67/65 turbo capable of 900 wheel with no shaft play Turbo blanket Complete...
  11. 2

    04+ and ZZP Questions

    Im looking for a few things on black Friday, and have a few questions about the 04+ fitment vs the 97-03 1. the ZZP Alum radiator. My L32 already has a 7/8ths in it and on the ZZP site it says that the Alum version is only 1.25" for the 04 and 1.4" for the 97-03. I do know some of the fans...
  12. 2

    ZZP must be getting ready for Black Friday

    :th_laugh-lol3:
  13. 2

    2015 Pontiac Nationals Trophy

    So this year I decided to take the Grand Prix. The GP is a Real Special Edition with only 105 Models made in the Superior Blue Color and a long list of features that were never available on any other 2004 GTP. Any way the Special Ed took 2nd place in the 1997-2008 Grand Prix Class. here are...
  14. 2

    White Stitching question

    do all the 06+ cars with the Perf. Leather on the steering wheel and the shifter have the white stitching, or were they made in Black? Im looking at a shifter from a 2006 Tan interior Car and cant tell if the stitching is just dirty and supposed to be white shifter in question...
  15. 2

    Looking for a 04+ part number

    04+ guys please help me out. Im looking for a Filler panel that surrounds the hood latch. My 04 is a Early production and does not have the filler plate. Here is picture of a GP with the Filler and here is Daves old car with out the filler See the difference?? so who can help me with...
See more
Back
Top