• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Prix intercooler help!

S

szalajka05

New member
Looking at getting a intercooler kit from zzp but I want to know if anyone has done it yet to let me know if its worth it. Explain problems you had during installation and if there was any problems after installation and where you got your kits and everything that was installed. Pictures would be awesome.

Here is the site to where I want to purchase mine.

ZZPerformance - Intercooler #

Thanks!
 




Well with a intercooler kit I can automatically put a 2.1 pulley on with no kr. I'm not doing that tho, I just want a 3.5 pulley, headers, cai, res delete with a 28 inch glasspack and a dyno tune. Should bring about 400hp and around 475tg "what I was told"
 
400 CHP is 320 WHP.

Which I might say would be stock cam record territory which means you're going to have to work harder than that to get there.
 
Core and LIM from here:
http://www.grandprixforums.net/450-...on-m90-supercharger-3800-3-8-liter-42711.html

Hoses and clamps you can get at a home improvement store

Heat exchanger you can get off Frozenboost.com or one from a 3800 Vendor OR you can get a VW radiator and use that.

Pump you can get off Ebay. I am using a Johnson pump because it's small and works
very well.

You will save quite is bit sourcing everything yourself instead of buying a kit

OR

Find a full used kit off here or another forum but it probably won't be phenolic.
 


Yea 2.1 is a couple thousand dollars away. And then there's the trans. I fear you need to do some research. Start with the safetly modding thread.
 
Twas just teasing... You really need "supporting mods" first, at least headers anyway, and a good custom tune(boxed tunes can blow motors)
 
And fuel rail prices have to be added in... Here's a set I welded up and powdercoated and the rest of my IC setup before I started it back up to discover my flexplate was bent somehow. It's ZZP S2 core, ZZP S3 FMHE, 8GPM pump

IMG_2555-1.jpg


IMG_2491.jpg


IMG_2492.jpg


IMG_2493.jpg


IMG_2494.jpg
 


is there any kind of guide? im planing on taking this step and want EVERYTHING to be ready and in order.

what would i need? and i mean like EVERYTHING NEEDED!!!
 
I have a 07 and I want to do this upgrade, lemme know if there is any problems and how the vehicle runs after its complete also did you have to modify the front bumper and are you able to use the stock hood?
 
Pure2sin said:
Core and LIM from here:
http://www.grandprixforums.net/450-...on-m90-supercharger-3800-3-8-liter-42711.html

Hoses and clamps you can get at a home improvement store

Heat exchanger you can get off Frozenboost.com or one from a 3800 Vendor OR you can get a VW radiator and use that.

Pump you can get off Ebay. I am using a Johnson pump because it's small and works
very well.

You will save quite is bit sourcing everything yourself instead of buying a kit

OR

Find a full used kit off here or another forum but it probably won't be phenolic.
Click to expand...
Bumpin this up from way back. What model VW radiator would we be looing for to use as a HE?
 
You must log in or register to reply here.
Back
Top