• The site migration is complete! Hopefully everything transferred properly from the multiple decades old software we were using before. If you notice any issues please let me know, thanks! Also, I'm still working on things like chatbox, etc so hopefully those will be working in the next week or two.

Rubber "T" Fitting Question



Re: T

Check the local junkyards for some...I always yank them off cars when I'm there for this reason...

You can go to your local dealer and tell them to pull up a diagram of the motor and you can get the entire section but I don't think you can just buy the "T"s seperatly.
 
I'd just go up there and have them pull the diagram again and write down the part # just for the "T" then...like I said...do you have any junkyards local to you?

Check them as well.
 
I redid all my vacuum lines with napa tee fittings and vacuum hose. Something like 50 cents a foot for line and 2-3 bucks for the tees
 


logan809 said:
I redid all my vacuum lines with napa tee fittings and vacuum hose. Something like 50 cents a foot for line and 2-3 bucks for the tees
Click to expand...
I'm going to go with THIS^^. I had to make one up (the dealership felt bad for me... that's right!! and gave me a foot of hose for free) I bought a barbed T and made one up.. Ill snap a pic if you want.

Ps...ya, the you can't buy the T seperate from the dealership (I tried too). Haven't seen a S/C'd GP in my local yard yet, hence why I had to make my own.
 
You must log in or register to reply here.
Back
Top